Parts catalogs · Eaton

Eaton Model 33 / 39 / 46 Series 1 Heavy Duty Hydrostatic Pump Parts Breakdown

Complete component breakdown for the Eaton Series 1 Model 33, 39 and 46 heavy duty hydrostatic variable pumps, taken from Eaton parts list 6-608. Models 33 and 39 share almost every part. Model 46 differs in the rotating group, piston slipper set, slipper retaining plate, cylinder barrel kit, bearing plate, valve plate and end cover. Rows that are model specific say so. Reference numbers match the exploded view above. The control and the charge pump are covered in full below. Control parts come from Eaton parts list 6-407 and charge pump parts from Eaton parts list 6-610, and each has its own exploded view above. Eaton numbers some control parts with a -000 suffix in its item master and without it in parts list 6-407; where both forms are known, both are shown.

363 parts across 17 categories

Source: Eaton parts lists 6-608 (pumps), 6-407 (manual displacement control) and 6-610 (charge pumps)

Eaton Model 33 / 39 / 46 Series 1 Heavy Duty Hydrostatic Pump exploded view diagram

Eaton Model 33 / 39 / 46 Series 1 Heavy Duty Hydrostatic Pump exploded view diagram

Eaton Model 33 / 39 / 46 Series 1 Heavy Duty Hydrostatic Pump exploded view diagram

Tap a diagram to zoom in.

Seal Kits and Overhaul Kits 5 parts

Fits Model 33, 39 and 46: sealing overhaul kit, variable PUMP

OEM 990088-000 · Eaton description: PV sealing overhaul kit 33/39/46

Does not include the drive shaft seal, which is a separate kit.

Qty 1

Fits Model 33, 39 and 46: sealing overhaul kit

OEM 990089-000 · Eaton description: PV sealing o/haul kit

Send us your product number and we will confirm whether your unit takes 990088 or 990089.

Qty 1

Model 46 only: seal overhaul kit

OEM 990093-001 · Eaton description: seal overhaul kit 46

Qty 1

Ref 1

Fits Model 33, 39 and 46: kit, shaft seal (face seal type)

OEM 990231

The shaft seal is never inside the sealing overhaul kit. 990231 is the face seal assembly used on pumps built before September 1999.

Qty 1

Fits Model 33, 39 and 46: shaft seal kit, lip seal type

OEM 990709-000 · Contains drive shaft seal 108395, retaining ring 101680-250, spacer 107836-000

For units built after 1999. Eaton changed from the face seal to a lip seal in September 1999.

Qty 1

Drive Shafts, Ref 10 8 parts

Ref 10-A

Fits Model 33, 39 and 46: shaft, 1-1/2 in. straight keyed

OEM 104897

Qty 1

Ref 10-B

Model 33 and 39 only: shaft, 1-3/8 in. tapered

OEM 104954

Not offered on Model 46.

Qty 1

Ref 10-C

Model 33 and 39 only: shaft, 1-3/8 in. tapered, splined drive end for B-pad charge pump

OEM 105210

Not offered on Model 46.

Qty 1

Ref 10-D

Fits Model 33, 39 and 46: shaft, 14 tooth 12/24 pitch

OEM 104204

Qty 1

Ref 10-E

Fits Model 33, 39 and 46: shaft, 14 tooth 12/24 pitch, splined drive end for B-pad charge pump

OEM 104961

Qty 1

Ref 10-F

Fits Model 33, 39 and 46: shaft, 21 tooth 16/32 pitch

OEM 104586

Qty 1

Ref 10-G

Model 33 and 39 only: shaft, 21 tooth 16/32 pitch, splined drive end for B-pad charge pump

OEM 104933

Not offered on Model 46.

Qty 1

Ref 10-H

Fits Model 33, 39 and 46: shaft, 23 tooth 16/32 pitch

OEM 104504

Qty 1

Rotating Group, Model 46 differs 13 parts

Ref 14 (M33/39)

Model 33 and 39 only: kit, rotating group

OEM 990425

The Model 46 kit is 990427.

Qty 1

Ref 14 (M46)

Model 46 only: kit, rotating group

OEM 990427

The Model 33 and 39 kit is 990425.

Qty 1

Ref 15 (M33/39)

Model 33 and 39 only: sub-assembly, piston and slipper

OEM 101073

Nine per pump, supplied as a matched set. The Model 46 part is 104199.

Qty 9

Ref 15 (M46)

Model 46 only: sub-assembly, piston and slipper

OEM 104199

Nine per pump, supplied as a matched set. The Model 33 and 39 part is 101073.

Qty 9

Ref 16 (M33/39)

Model 33 and 39 only: plate, slipper retaining

OEM 103244

The Model 46 part is 104211.

Qty 1

Ref 16 (M46)

Model 46 only: plate, slipper retaining

OEM 104211

The Model 33 and 39 part is 103244.

Qty 1

Ref 20 (M33)

Model 33 only: kit, cylinder barrel

OEM 909412

Printed as 909412 in Eaton parts list 6-608. The rest of the row runs 990412, 990413, 990414, so this looks like a misprint for 990412. Confirm with us before ordering.

Qty 1

Ref 20 (M39)

Model 39 only: kit, cylinder barrel

OEM 990412

Qty 1

Ref 20 (M46)

Model 46 only: kit, cylinder barrel

OEM 990413

Qty 1

Ref 21 (M33/39)

Model 33 and 39 only: plate, bearing

OEM 103241

The Model 46 part is 104198.

Qty 1

Ref 21 (M46)

Model 46 only: plate, bearing

OEM 104198

The Model 33 and 39 part is 103241.

Qty 1

Ref 13

Fits Model 33, 39 and 46: plate, thrust

OEM 103236

Qty 1

Ref 19

Fits Model 33, 39 and 46: kit, Series 1 hold down

OEM 990416

Qty 1

Valve Plate, Ref 22, model and rotation specific 8 parts

Ref 22 (M33/39 CW)

Model 33 and 39 only: plate, valve, clockwise, standard

OEM 104974

Qty 1

Ref 22 (M33/39 CCW)

Model 33 and 39 only: plate, valve, counterclockwise, standard

OEM 104978

Qty 1

Ref 22 (M33/39 CW propel)

Model 33 and 39 only: plate, valve, clockwise, propel

OEM 104582

Qty 1

Ref 22 (M33/39 CCW propel)

Model 33 and 39 only: plate, valve, counterclockwise, propel

OEM 104296

Qty 1

Ref 22 (M46 CW)

Model 46 only: plate, valve, clockwise, standard

OEM 105186

Qty 1

Ref 22 (M46 CCW)

Model 46 only: plate, valve, counterclockwise, standard

OEM 104856

Qty 1

Ref 22 (M46 CW propel)

Model 46 only: plate, valve, clockwise, propel

OEM 104503

Qty 1

Ref 22 (M46 CCW propel)

Model 46 only: plate, valve, counterclockwise, propel

OEM 104203

Qty 1

Mounting Flange and Bearings 9 parts

Ref 2

Fits Model 33, 39 and 46: o-ring

OEM 8761-145

Qty 1

Ref 3

Fits Model 33, 39 and 46: o-ring

OEM 104166-131

Qty 1

Ref 4

Fits Model 33, 39 and 46: bolt, mounting flange

OEM 95863-100

Qty 12

Ref 5

Fits Model 33, 39 and 46: strap, shipping

OEM 96558

Qty 2

Ref 6

Fits Model 33, 39 and 46: sub-assembly, mounting flange

OEM 104207

Qty 1

Ref 7

Fits Model 33, 39 and 46: cup, bearing

OEM 103232

Qty 1

Ref 8

Fits Model 33, 39 and 46: dowel

OEM 98202

Qty 7

Ref 9

Fits Model 33, 39 and 46: gasket, mounting flange

OEM 8828

Qty 1

Ref 11

Fits Model 33, 39 and 46: bearing kit, mounting flange

OEM 990389

Qty 1

Swashplate and Trunnion 8 parts

Ref 12 (M33)

Model 33 only: sub-assembly, swashplate

OEM 104301

The Model 39 and 46 swashplate is 104226.

Qty 1

Ref 12 (M39/46)

Model 39 and 46 only: sub-assembly, swashplate

OEM 104226

The Model 33 swashplate is 104301.

Qty 1

Ref 28

Fits Model 33, 39 and 46: bolt, trunnion

OEM 95863-088

Qty 6

Ref 29

Fits Model 33, 39 and 46: sub-assembly, trunnion

OEM 103982

Qty 2

Ref 30

Fits Model 33, 39 and 46: kit, trunnion bearing

OEM 990024

Qty 2

Ref 31

Fits Model 33, 39 and 46: o-ring, trunnion

OEM 8761-231

Qty 3

Ref 32 (M33)

Model 33 only: shim pack, trunnion

OEM 9900012

Printed as 9900012 in Eaton parts list 6-608, while Models 39 and 46 read 990012. This looks like a misprint. Confirm with us before ordering.

Qty 2

Ref 32 (M39/46)

Model 39 and 46 only: shim pack, trunnion

OEM 990012

Qty 2

Housing, Servo and Controls 11 parts

Ref 34

Fits Model 33, 39 and 46: sub-assembly, o-ring plug

OEM 25083-004

Qty 1

Ref 35

Fits Model 33, 39 and 46: housing

OEM 101838

Qty 1

Ref 36

Fits Model 33, 39 and 46: sub-assembly, servo piston

OEM 104401

Qty 2

Ref 37

Fits Model 33, 39 and 46: retaining ring, external

OEM 95820-056

Qty 4

Ref 38

Fits Model 33, 39 and 46: pin, linkage

OEM 95654

Qty 2

Ref 39

Fits Model 33, 39 and 46: o-ring, servo

OEM 8761-143

Qty 2

Ref 40

Fits Model 33, 39 and 46: o-ring, servo

OEM 8761-147

Qty 2

Ref 41

Fits Model 33, 39 and 46: kit, servo sleeve

OEM 990037

Qty 2

Ref 42

Fits Model 33, 39 and 46: retainer, servo

OEM 95675

Qty 2

Ref 43

Fits Model 33, 39 and 46: screw, cap

OEM 95890-038

Qty 6

Ref 70

Fits Model 33, 39 and 46: sub-assembly, o-ring plug

OEM 25090-004

Qty 1

End Cover and Check Valves 20 parts

Ref 44

Fits Model 33, 39 and 46: gasket, end cover

OEM 8734

Qty 1

Ref 45

Fits Model 33, 39 and 46: kit, end cover bearing

OEM 990014

Qty 1

Ref 46

Fits Model 33, 39 and 46: shim pack, shaft

OEM 990017

Qty 1

Ref 48

Fits Model 33, 39 and 46: sub-assembly, check valve

OEM 101187

Qty 2

Ref 49

Fits Model 33, 39 and 46: o-ring, check valve

OEM 8765-113

Qty 2

Ref 50

Fits Model 33, 39 and 46: ring, back-up

OEM 8770-113

Qty 2

Ref 52

Fits Model 33, 39 and 46: bolt, end cover

OEM 103090-275

Qty 6

Ref 53

Fits Model 33, 39 and 46: bolt, end cover

OEM 103090-150

Qty 2

Ref 47 (M33/39 C61)

Model 33 and 39 only: end cover, 1 inch Code 61

OEM 50515

Qty 1

Ref 47 (M33/39 C61 tap)

Model 33 and 39 only: end cover, 1 inch Code 61 with pressure tap

OEM 101433

Qty 1

Ref 47 (M33/39 C61 IPOR)

Model 33 and 39 only: end cover, 1 inch Code 61 IPOR sub-assembly

OEM 103152

Qty 1

Ref 47 (M33/39 C62)

Model 33 and 39 only: end cover, 1 inch Code 62

OEM 101331

Qty 1

Ref 47 (M33/39 C62 IPOR)

Model 33 and 39 only: end cover, 1 inch Code 62 IPOR sub-assembly

OEM 104913

Qty 1

Ref 47 (M33/39 C62 tap)

Model 33 and 39 only: end cover, 1 inch Code 62 with pressure tap

OEM 101441

Qty 1

Ref 47 (M33/39 O-ring)

Model 33 and 39 only: end cover, 1 inch o-ring port

OEM 101490

Qty 1

Ref 47 (M46 C61)

Model 46 only: end cover, 1 inch Code 61

OEM 104209

Qty 1

Ref 47 (M46 C61 tap)

Model 46 only: end cover, 1 inch Code 61 with pressure tap

OEM 104210

Qty 1

Ref 47 (M46 C61 IPOR)

Model 46 only: end cover, 1 inch Code 61 IPOR sub-assembly

OEM 105017

Qty 1

Ref 47 (M46 C62)

Model 46 only: end cover, 1 inch Code 62

OEM 104577

Qty 1

Ref 47 (M46 O-ring)

Model 46 only: end cover, 1 inch o-ring port

OEM 104265

Qty 1

Charge Pump, Ref 54: common parts 17 parts

Ref 1

Fits the standard charge pump, A-pad charge pump and B-pad charge pump: gasket, charge pump to pump housing

OEM 101179-000

Charge pump kits and subassemblies carry a three digit relief valve suffix that is not fixed, so they are ordered to a pressure setting rather than from a plain part number. Multiply the suffix by ten for the setting in psi, for example 990006-022 is 220 psi. Standard kits run 990006 through 990011, 990433 through 990443, 990598 and 990617; A-pad kits run 990352 through 990357, 990446, 990449, 990600 and 990610 through 990612; B-pad kits run 990346 through 990351, 990447, 990448 and 990603; wet A-pad and wet B-pad kits run 990627 through 990632 and 990843 through 990848. Send us the number from your charge pump and we will confirm the setting.

Qty 1

Ref 1

Fits the A-pad charge pump and B-pad charge pump: gasket, pressure side filter

OEM 103020-000

Qty 1

Ref 1

Fits the A-pad charge pump and B-pad charge pump: gasket, steel core, pressure side filter

OEM 105106-000

Qty 1

Ref 2

Fits the standard charge pump, A-pad charge pump and B-pad charge pump: dowel, solid

OEM 98202 · Eaton parts list 6-610 prints this as 98202-000.

Qty 2

Ref 7

Fits the standard charge pump, A-pad charge pump and B-pad charge pump: o-ring kit for the low pressure relief valve

OEM 990104-000

Qty 1

Ref 8

Fits the standard charge pump, A-pad charge pump and B-pad charge pump: o-ring

OEM 102574-000

Qty 2

Ref 12

Fits the standard charge pump: cover with bearing

OEM 990106-000

Qty 1

Ref 12

Fits the A-pad charge pump: cover with bushing, dry, includes the shaft seal at Ref 16

OEM 990364-000

Qty 1

Ref 12

Fits the B-pad charge pump: cover with bushing, dry, includes the shaft seal at Ref 16

OEM 990345-000

Qty 1

Ref 12

Fits the A-pad charge pump: cover with bushing, wet

OEM 990482-000

Qty 1

Ref 12

Fits the B-pad charge pump: cover with bushing, wet

OEM 990599-000

Qty 1

Ref 15

Fits the A-pad charge pump and B-pad charge pump: retaining ring

OEM 102853-000

Qty 2

Ref 16

Fits the A-pad charge pump: shaft seal

OEM 102561-000

Qty 1

Ref 16

Fits the B-pad charge pump: shaft seal

OEM 103357-000

Qty 1

Ref 17

Fits the A-pad charge pump: gasket, cover

OEM 102930-000

Qty 1

Ref 17

Fits the B-pad charge pump: gasket, cover

OEM 102919-000

Qty 1

Ref 18

Fits the B-pad charge pump: coupling, splined

OEM 103365-000

Qty 1

Charge Pump, Ref 54: body and low pressure relief valve 15 parts

Ref 5

Fits the standard charge pump: body, standard shaft bore and bearing, internal discharge port

OEM 990107-000

Qty 1

Ref 5

Fits the standard charge pump: body, standard shaft bore and bearing, external discharge port

OEM 990546-000

Qty 1

Ref 5

Fits the standard charge pump: body, standard shaft bore and bearing, remote filter ports, A side

OEM 990547-000

Qty 1

Ref 5

Fits the A-pad and B-pad charge pump: body, A-pad or B-pad shaft bore and bushing, internal discharge port

OEM 990344-000

Qty 1

Ref 5

Fits the A-pad and B-pad charge pump: body, A-pad or B-pad shaft bore and bushing, external discharge port

OEM 990548-000

Qty 1

Ref 5

Fits the A-pad and B-pad charge pump: body, A-pad or B-pad shaft bore and bushing, remote filter ports, A side

OEM 990549-000

Qty 1

Ref 5

Fits the A-pad and B-pad charge pump: body, A-pad or B-pad shaft bore and bushing, pressure side filter, B side

OEM 990458-000

Qty 1

Ref 6

Fits the standard, A-pad and B-pad charge pump: low pressure relief valve sub-assembly, 15 bar [220 psi] setting

OEM 101048-022

Qty 1

Ref 6

Fits the standard, A-pad and B-pad charge pump: low pressure relief valve sub-assembly, 17 bar [240 psi] setting

OEM 101048-024

Qty 1

Ref 6

Fits the standard, A-pad and B-pad charge pump: low pressure relief valve sub-assembly, 18 bar [260 psi] setting

OEM 101048-026

Qty 1

Ref 6

Fits the standard, A-pad and B-pad charge pump: low pressure relief valve sub-assembly, 19 bar [280 psi] setting

OEM 103072-028

Qty 1

Ref 6

Fits the standard, A-pad and B-pad charge pump: low pressure relief valve sub-assembly, 21 bar [300 psi] setting

OEM 103072-030

Qty 1

Ref 6

Fits the standard, A-pad and B-pad charge pump: low pressure relief valve sub-assembly, 23 bar [340 psi] setting

OEM 103072-034

Qty 1

Ref 6

Fits the standard, A-pad and B-pad charge pump: low pressure relief valve sub-assembly, 24 bar [350 psi] setting

OEM 103072-035

Qty 1

Ref 6

Fits the standard, A-pad and B-pad charge pump: low pressure relief valve sub-assembly, 26 bar [380 psi] setting

OEM 103072-038

Qty 1

Charge Pump, Ref 54: displacement specific parts 52 parts

Ref 3

Fits the standard charge pump at 13.9 cm3/r [0.85 in3/r] displacement: shaft

OEM 101006-000

Qty 1

Ref 3

Fits the standard charge pump at 21.0 cm3/r [1.28 in3/r] displacement: shaft

OEM 101007-000

Qty 1

Ref 3

Fits the standard charge pump at 27.9 cm3/r [1.70 in3/r] displacement: shaft

OEM 101008-000

Qty 1

Ref 3

Fits the A-pad charge pump at 13.9 cm3/r [0.85 in3/r] displacement: shaft

OEM 103249-085

Qty 1

Ref 3

Fits the A-pad charge pump at 21.0 cm3/r [1.28 in3/r] displacement: shaft

OEM 103249-128

Qty 1

Ref 3

Fits the A-pad charge pump at 27.9 cm3/r [1.70 in3/r] displacement: shaft

OEM 103249-170

Qty 1

Ref 3

Fits the A-pad charge pump at 34.7 cm3/r [2.12 in3/r] displacement: shaft

OEM 103249-212

Qty 1

Ref 3

Fits the B-pad charge pump at 13.9 cm3/r [0.85 in3/r] displacement: shaft

OEM 103358-085

Qty 1

Ref 3

Fits the B-pad charge pump at 21.0 cm3/r [1.28 in3/r] displacement: shaft

OEM 103358-128

Qty 1

Ref 3

Fits the B-pad charge pump at 27.9 cm3/r [1.70 in3/r] displacement: shaft

OEM 103358-170

Qty 1

Ref 3

Fits the B-pad charge pump at 34.7 cm3/r [2.12 in3/r] displacement: shaft

OEM 103358-212

Qty 1

Ref 3

Fits the standard charge pump at 34.7 cm3/r [2.12 in3/r] displacement: shaft

OEM 106567-212

Qty 1

Ref 4

Fits the standard charge pump, A-pad charge pump and B-pad charge pump at 13.9 cm3/r [0.85 in3/r] displacement: drive pin

OEM 101305-000

Qty 1

Ref 4

Fits the standard charge pump, A-pad charge pump and B-pad charge pump at 21.0 cm3/r [1.28 in3/r] displacement: drive pin

OEM 101311-000

Qty 1

Ref 4

Fits the standard charge pump, A-pad charge pump and B-pad charge pump at 27.9 cm3/r [1.70 in3/r] displacement: drive pin

OEM 101312-000

Qty 1

Ref 4

Fits the standard charge pump, A-pad charge pump and B-pad charge pump at 34.7 cm3/r [2.12 in3/r] displacement: drive pin

OEM 106529-000

Qty 1

Ref 9

Fits the standard charge pump, A-pad charge pump and B-pad charge pump at 13.9 cm3/r [0.85 in3/r] displacement: spacer

OEM 101016-000

Qty 1

Ref 9

Fits the standard charge pump, A-pad charge pump and B-pad charge pump at 21.0 cm3/r [1.28 in3/r] displacement: spacer

OEM 101017-000

Qty 1

Ref 9

Fits the standard charge pump, A-pad charge pump and B-pad charge pump at 27.9 cm3/r [1.70 in3/r] displacement: spacer

OEM 101018-000

Qty 1

Ref 9

Fits the standard charge pump, A-pad charge pump and B-pad charge pump at 34.7 cm3/r [2.12 in3/r] displacement: spacer

OEM 106518-000

Qty 1

Ref 10

Fits the standard charge pump at 13.9 cm3/r [0.85 in3/r] displacement: gerotor

OEM 22255-003

Qty 1

Ref 10

Fits the standard charge pump at 21.0 cm3/r [1.28 in3/r] displacement: gerotor

OEM 22255-005

Qty 1

Ref 10

Fits the standard charge pump at 27.9 cm3/r [1.70 in3/r] displacement: gerotor

OEM 22255-007

Qty 1

Ref 10

Fits the A-pad charge pump and B-pad charge pump at 13.9 cm3/r [0.85 in3/r] displacement: gerotor

OEM 22258-003

Qty 1

Ref 10

Fits the A-pad charge pump and B-pad charge pump at 21.0 cm3/r [1.28 in3/r] displacement: gerotor

OEM 22258-005

Qty 1

Ref 10

Fits the A-pad charge pump and B-pad charge pump at 27.9 cm3/r [1.70 in3/r] displacement: gerotor

OEM 22258-007

Qty 1

Ref 10

Fits the A-pad charge pump and B-pad charge pump at 34.7 cm3/r [2.12 in3/r] displacement: gerotor

OEM 23396-008

Qty 1

Ref 10

Fits the standard charge pump at 34.7 cm3/r [2.12 in3/r] displacement: gerotor

OEM 23397-008

Qty 1

Ref 11

Fits the standard charge pump, A-pad charge pump and B-pad charge pump at 34.7 cm3/r [2.12 in3/r] displacement: hollow dowel

OEM 106539-000

Qty 2

Ref 11

Fits the standard charge pump, A-pad charge pump and B-pad charge pump at 13.9 cm3/r [0.85 in3/r] displacement: hollow dowel

OEM 95660-000

Qty 2

Ref 11

Fits the standard charge pump, A-pad charge pump and B-pad charge pump at 21.0 cm3/r [1.28 in3/r] displacement: hollow dowel

OEM 98011-000

Qty 2

Ref 11

Fits the standard charge pump, A-pad charge pump and B-pad charge pump at 27.9 cm3/r [1.70 in3/r] displacement: hollow dowel

OEM 98012-000

Qty 2

Ref 13

Fits the standard charge pump and A-pad charge pump at 13.9 cm3/r [0.85 in3/r] displacement: bolt

OEM 95862-175

Qty 2

Ref 13

Fits the standard charge pump and A-pad charge pump at 21.0 cm3/r [1.28 in3/r] displacement: bolt

OEM 95862-200

Qty 2

Ref 13

Fits the standard charge pump and A-pad charge pump at 27.9 cm3/r [1.70 in3/r] displacement: bolt

OEM 95862-225

Qty 2

Ref 13

Fits the standard charge pump and A-pad charge pump at 34.7 cm3/r [2.12 in3/r] displacement: bolt

OEM 95862-250

Qty 2

Ref 13

Fits the B-pad charge pump at 13.9 cm3/r [0.85 in3/r] displacement: bolt

OEM 95912-175

Qty 2

Ref 13

Fits the B-pad charge pump at 21.0 cm3/r [1.28 in3/r] displacement: bolt

OEM 95912-200

Qty 2

Ref 13

Fits the B-pad charge pump at 27.9 cm3/r [1.70 in3/r] displacement: bolt

OEM 95912-225

Qty 2

Ref 13

Fits the B-pad charge pump at 34.7 cm3/r [2.12 in3/r] displacement: bolt

OEM 95912-250

Qty 2

Ref 14

Fits the standard charge pump at 13.9 cm3/r [0.85 in3/r] displacement: mounting bolt

OEM 105663-350

Qty 4

Ref 14

Fits the standard charge pump at 21.0 cm3/r [1.28 in3/r] displacement: mounting bolt

OEM 105663-375

Qty 4

Ref 14

Fits the standard charge pump at 27.9 cm3/r [1.70 in3/r] displacement: mounting bolt

OEM 105663-400

Qty 4

Ref 14

Fits the standard charge pump at 34.7 cm3/r [2.12 in3/r] displacement: mounting bolt

OEM 105663-425

Qty 4

Ref 14

Fits the A-pad charge pump and B-pad charge pump at 13.9 cm3/r [0.85 in3/r] displacement: mounting bolt

OEM 95912-350

Qty 4

Ref 14

Fits the A-pad charge pump and B-pad charge pump at 21.0 cm3/r [1.28 in3/r] displacement: mounting bolt

OEM 95912-375

Qty 4

Ref 14

Fits the A-pad charge pump and B-pad charge pump at 27.9 cm3/r [1.70 in3/r] displacement: mounting bolt

OEM 95912-400

Qty 4

Ref 14

Fits the A-pad charge pump and B-pad charge pump at 34.7 cm3/r [2.12 in3/r] displacement: mounting bolt

OEM 95912-425

Qty 4

Ref 14

Fits the wet B-pad charge pump at 13.9 cm3/r [0.85 in3/r] displacement: pan head mounting bolt

OEM 107019-350

Wet B-pad charge pumps only. A sealing washer, Ref 27, is used with this bolt.

Qty 4

Ref 14

Fits the wet B-pad charge pump at 21.0 cm3/r [1.28 in3/r] displacement: pan head mounting bolt

OEM 107019-375

Wet B-pad charge pumps only. A sealing washer, Ref 27, is used with this bolt.

Qty 4

Ref 14

Fits the wet B-pad charge pump at 27.9 cm3/r [1.70 in3/r] displacement: pan head mounting bolt

OEM 107019-400

Wet B-pad charge pumps only. A sealing washer, Ref 27, is used with this bolt.

Qty 4

Ref 14

Fits the wet B-pad charge pump at 34.7 cm3/r [2.12 in3/r] displacement: pan head mounting bolt

OEM 107019-425

Wet B-pad charge pumps only. A sealing washer, Ref 27, is used with this bolt.

Qty 4

Charge Pump, Ref 54: pressure side filter 13 parts

Ref 20

Fits the A-pad, wet A-pad, B-pad and wet B-pad charge pump: filter cartridge

OEM 104508-005

Qty 1

Ref 21

Fits the A-pad, wet A-pad, B-pad and wet B-pad charge pump: cap screw

OEM 95912-175

Qty 2

Ref 22

Fits the A-pad, wet A-pad and B-pad charge pump: filter base

OEM 104963-000

Qty 1

Ref 22

Fits the wet B-pad charge pump: filter base

OEM 108528-000

Qty 1

Ref 23

Fits the A-pad, wet A-pad, B-pad and wet B-pad charge pump: o-ring plug sub-assembly

OEM 25090-006

Qty 2

Ref 23

Fits the A-pad, wet A-pad, B-pad and wet B-pad charge pump: o-ring for the plug sub-assembly and the diagnostic receptacle

OEM 8785-006

Qty 2

Ref 23

Fits the A-pad, wet A-pad, B-pad and wet B-pad charge pump: diagnostic receptacle sub-assembly, optional

OEM 104312-000

Qty 1

Ref 23

Fits the A-pad, wet A-pad, B-pad and wet B-pad charge pump: dust cover for the diagnostic receptacle

OEM 104515-000

Qty 1

Ref 24

Fits the A-pad, wet A-pad, B-pad and wet B-pad charge pump: o-ring

OEM 8761-115

Qty 2

Ref 25

Fits the wet B-pad charge pump: spacer

OEM 107018-000

Qty 1

Ref 26

Fits the wet A-pad and wet B-pad charge pump: o-ring

OEM 104166-158

Qty 1

Ref 27

Fits the wet B-pad charge pump: sealing washer for the pan head mounting bolt

OEM 106926-000

Qty 4

Ref 12

Fits the wet B-pad charge pump: wet B-pad cover for the pressure side filter

OEM 108527-000

Qty 1

Charge Pump, Ref 54: displacement conversion kits 12 parts

Ref 3 to 14

Converts the standard charge pump to 13.9 cm3/r [0.85 in3/r] displacement

OEM 990025-000

Each conversion kit contains a gasket, shaft, drive pin, two o-rings, spacer, gerotor, two hollow dowels, two bolts and four mounting bolts.

Qty 1

Ref 3 to 14

Converts the standard charge pump to 21.0 cm3/r [1.28 in3/r] displacement

OEM 990026-000

Qty 1

Ref 3 to 14

Converts the standard charge pump to 27.9 cm3/r [1.70 in3/r] displacement

OEM 990027-000

Qty 1

Ref 3 to 14

Converts the standard charge pump to 34.7 cm3/r [2.12 in3/r] displacement

OEM 990619-000

Qty 1

Ref 3 to 14

Converts the A-pad charge pump to 13.9 cm3/r [0.85 in3/r] displacement

OEM 990310-000

Qty 1

Ref 3 to 14

Converts the A-pad charge pump to 21.0 cm3/r [1.28 in3/r] displacement

OEM 990311-000

Qty 1

Ref 3 to 14

Converts the A-pad charge pump to 27.9 cm3/r [1.70 in3/r] displacement

OEM 990312-000

Qty 1

Ref 3 to 14

Converts the A-pad charge pump to 34.7 cm3/r [2.12 in3/r] displacement

OEM 990620-000

Qty 1

Ref 3 to 14

Converts the B-pad charge pump to 13.9 cm3/r [0.85 in3/r] displacement

OEM 990379-000

Qty 1

Ref 3 to 14

Converts the B-pad charge pump to 21.0 cm3/r [1.28 in3/r] displacement

OEM 990380-000

Qty 1

Ref 3 to 14

Converts the B-pad charge pump to 27.9 cm3/r [1.70 in3/r] displacement

OEM 990381-000

Qty 1

Ref 3 to 14

Converts the B-pad charge pump to 34.7 cm3/r [2.12 in3/r] displacement

OEM 990621-000

Qty 1

Pump Control, Ref 23: manual displacement control with neutral lockout 47 parts

Ref 1

Fits the manual displacement pump control: adjusting screw, spring box

OEM 101373-000 · Eaton parts list 6-407 prints this as 101373.

Control kits and subassemblies carry an orifice designator, so they are ordered to an orifice size rather than from a plain part number. For Models 33 through 64 the neutral lockout switch control is kit 990076 with subassembly 102772, the neutral lockout with inching valve and pressure override is subassembly 103083, the neutral lockout with pressure override is subassembly 102781, and the neutral lockout with inching valve is subassembly 105226. Send us the number from your control and we will confirm the orifice.

Qty 1

Ref 2

Fits the manual displacement pump control: o-ring

OEM 8761-016

In seal kit 990287.

Qty 1

Ref 3

Fits the manual displacement pump control: control spool sub-assembly, wide band neutral

OEM 101336-000 · Eaton parts list 6-407 prints this as 101336.

Qty 1

Ref 4

Fits the manual displacement pump control: shoulder screw, socket head

OEM 96273-075

Qty 1

Ref 5

Fits the manual displacement pump control: spring retainer

OEM 96279

Qty 1

Ref 6

Fits the manual displacement pump control: spring, control spool

OEM 70462

Qty 1

Ref 7

Fits the manual displacement pump control: spacer, spring box

OEM 96280

Qty 1

Ref 8

Fits the manual displacement pump control: control spool, wide band neutral

OEM 101337-000 · Eaton parts list 6-407 prints this as 101337.

Qty 1

Ref 9

Fits the manual displacement pump control: control housing

OEM 102150-000 · Eaton parts list 6-407 prints this as 102150.

Qty 1

Ref 9a

Fits the manual displacement pump control: control housing, inching

OEM 103082

Inching valve controls only.

Qty 1

Ref 9a

Fits the manual displacement pump control: ball plug

OEM 95881-022

Inching valve controls only.

Qty 1

Ref 10

Fits the manual displacement pump control: control shaft sub-assembly

OEM 104306-000 · Eaton parts list 6-407 prints this as 104306.

Qty 1

Ref 10a

Fits the manual displacement pump control: control shaft

OEM 104040-000 · Eaton parts list 6-407 prints this as 104040.

Qty 1

Ref 11

Fits the manual displacement pump control: o-ring, control shaft

OEM 8761-012

In seal kit 990287.

Qty 1

Ref 12

Fits the manual displacement pump control: exclusion seal, control shaft

OEM 104713-000 · Eaton parts list 6-407 prints this as 104713.

Qty 1

Ref 13

Fits the manual displacement pump control: control lever

OEM 95729

Qty 1

Ref 14

Fits the manual displacement pump control: lockwasher, internal tooth

OEM 96100-031

Qty 1

Ref 15

Fits the manual displacement pump control: hex nut

OEM 96081-031

Qty 1

Ref 16

Fits the manual displacement pump control: o-ring plug sub-assembly

OEM 25090-006

Qty 2

Ref 16

Fits the manual displacement pump control: o-ring for the plug sub-assembly

OEM 8785-006

In seal kit 990287.

Qty 2

Ref 17

Fits the manual displacement pump control: set screw, hex socket

OEM 101128-000 · Eaton parts list 6-407 prints this as 101128.

Qty 1

Ref 18

Fits the manual displacement pump control: slotted spring pin

OEM 96201-088

Qty 1

Ref 19

Fits the manual displacement pump control: control connector

OEM 102754-000 · Eaton parts list 6-407 prints this as 102754.

In control conversion kit 990343.

Qty 1

Ref 20

Fits the manual displacement pump control: link

OEM 102767-000 · Eaton parts list 6-407 prints this as 102767.

In control conversion kit 990343.

Qty 1

Ref 21

Fits the manual displacement pump control: external retaining ring

OEM 96098-025

In control conversion kit 990343.

Qty 2

Ref 22

Fits the manual displacement pump control: control link, Models 33 through 64 with pressure override

OEM 102765-000 · Eaton parts list 6-407 prints this as 102765.

The specific model is identified on the link.

Qty 1

Ref 22

Fits the manual displacement pump control: control link, Models 33 through 64

OEM 102763-000 · Eaton parts list 6-407 prints this as 102763.

In control conversion kit 990343. The specific model is identified on the link.

Qty 1

Ref 23

Fits the manual displacement pump control: seal washer for the control valve orifice

OEM 105150

Qty 1

Ref 25

Fits the manual displacement pump control: set screw, hex socket

OEM 98361-038

Qty 1

Ref 26

Fits the manual displacement pump control: shaft, inching valve

OEM 102537-000 · Eaton parts list 6-407 prints this as 102537.

Inching valve controls only.

Qty 1

Ref 27

Fits the manual displacement pump control: o-ring

OEM 8761-010

Inching valve controls only.

Qty 1

Ref 28

Fits the manual displacement pump control: o-ring

OEM 8785-008

Qty 1

Ref 29

Fits the manual displacement pump control: set screw, hex socket

OEM 102149-019

Qty 1

Ref 30

Fits the manual displacement pump control: neutral lockout adapter sub-assembly

OEM 102148

Qty 1

Ref 31

Fits the manual displacement pump control: ball, grade 200

OEM 95881-019

Qty 1

Ref 32

Fits the manual displacement pump control: o-ring

OEM 8761-004

Qty 1

Ref 33

Fits the manual displacement pump control: pin, lockout adapter

OEM 102146

Qty 1

Ref 34

Fits the manual displacement pump control: switch, neutral lockout

OEM 102147

Qty 1

Ref 35

Fits the manual displacement pump control: template, inching valve

OEM 103660

Inching valve controls only.

Qty 1

Ref 36

Fits the manual displacement pump control: gasket, control to pump housing

OEM 8835

In seal kit 990287.

Qty 1

Ref 36

Fits the manual displacement pump control: gasket, control to pump housing

OEM 101930-000 · Eaton parts list 6-407 prints this as 101930.

Qty 1

Ref 37

Fits the manual displacement pump control: mounting bolt

OEM 95862-100

Qty 4

Ref 37

Fits the manual displacement pump control: mounting bolt

OEM 95862-225

Qty 4

Ref 38

Fits the manual displacement pump control: mounting bolt

OEM 95862-175

Qty 2

Ref 38

Fits the manual displacement pump control: mounting bolt

OEM 95862-300

Qty 2

Fits the manual displacement pump control: seal kit for the manual displacement pump control

OEM 990287

Contains Ref 2, Ref 11, Ref 16 o-ring and Ref 36 gasket 8835.

Qty 1

Fits the manual displacement pump control: control conversion kit, dual link to single link

OEM 990343

Contains Ref 19, Ref 20, Ref 21 and control link 102763.

Qty 1

Pump Control, Ref 23: control valve orifices 18 parts

Ref 24

Fits the manual displacement pump control: hat orifice, control valve, Eaton size designator 028

OEM 103488-028

The hat orifice is the current design. Earlier controls used plate orifice 101619 with the same size designator.

Qty 1

Ref 24

Fits the manual displacement pump control: hat orifice, control valve, Eaton size designator 036

OEM 103488-036

Qty 1

Ref 24

Fits the manual displacement pump control: hat orifice, control valve, Eaton size designator 044

OEM 103488-044

Qty 1

Ref 24

Fits the manual displacement pump control: hat orifice, control valve, Eaton size designator 052

OEM 103488-052

Qty 1

Ref 24

Fits the manual displacement pump control: hat orifice, control valve, Eaton size designator 057

OEM 103488-057

Qty 1

Ref 24

Fits the manual displacement pump control: hat orifice, control valve, Eaton size designator 065

OEM 103488-065

Qty 1

Ref 24

Fits the manual displacement pump control: hat orifice, control valve, Eaton size designator 073

OEM 103488-073

Eaton advises contacting an Eaton representative before ordering this orifice for an inching valve.

Qty 1

Ref 24

Fits the manual displacement pump control: hat orifice, control valve, Eaton size designator 094

OEM 103488-094

Not for use with an inching valve.

Qty 1

Ref 24

Fits the manual displacement pump control: hat orifice, control valve, Eaton size designator 102

OEM 103488-102

Not for use with an inching valve.

Qty 1

Ref 24

Fits the manual displacement pump control: plate orifice, control valve, Eaton size designator 028

OEM 101619-028

The plate orifice is the earlier design, seated and staked in three places. The current design is hat orifice 103488 with the same size designator.

Qty 1

Ref 24

Fits the manual displacement pump control: plate orifice, control valve, Eaton size designator 036

OEM 101619-036

Qty 1

Ref 24

Fits the manual displacement pump control: plate orifice, control valve, Eaton size designator 044

OEM 101619-044

Qty 1

Ref 24

Fits the manual displacement pump control: plate orifice, control valve, Eaton size designator 052

OEM 101619-052

Qty 1

Ref 24

Fits the manual displacement pump control: plate orifice, control valve, Eaton size designator 057

OEM 101619-057

Qty 1

Ref 24

Fits the manual displacement pump control: plate orifice, control valve, Eaton size designator 065

OEM 101619-065

Qty 1

Ref 24

Fits the manual displacement pump control: plate orifice, control valve, Eaton size designator 073

OEM 101619-073

Eaton advises contacting an Eaton representative before ordering this orifice for an inching valve.

Qty 1

Ref 24

Fits the manual displacement pump control: plate orifice, control valve, Eaton size designator 094

OEM 101619-094

Not for use with an inching valve.

Qty 1

Ref 24

Fits the manual displacement pump control: plate orifice, control valve, Eaton size designator 102

OEM 101619-102

Not for use with an inching valve.

Qty 1

Charge Pump, Ref 54: kits and subassemblies 102 parts

Ref 54

Fits the standard charge pump: charge pump kit, 13.9 cm3/r [0.85 in3/r] displacement, counterclockwise

OEM 990006

Eaton numbers every charge pump kit and subassembly below with a three digit suffix for the low pressure relief valve setting, multiplied by ten, so 022 is 220 psi. Each kit contains a charge pump subassembly, four mounting bolts, two dowels and a gasket; a subassembly on its own does not include them. Tell us the relief setting stamped on your charge pump, or the full number from the old one, and we will confirm the exact part number before we quote. Ordered as 990006-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump subassembly, 13.9 cm3/r [0.85 in3/r] displacement, counterclockwise

OEM 101000

Ordered as 101000-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump kit, 13.9 cm3/r [0.85 in3/r] displacement, clockwise

OEM 990007

Ordered as 990007-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump subassembly, 13.9 cm3/r [0.85 in3/r] displacement, clockwise

OEM 101001

Ordered as 101001-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump kit, 21.0 cm3/r [1.28 in3/r] displacement, counterclockwise

OEM 990008

Ordered as 990008-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump subassembly, 21.0 cm3/r [1.28 in3/r] displacement, counterclockwise

OEM 101002

Ordered as 101002-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump kit, 21.0 cm3/r [1.28 in3/r] displacement, clockwise

OEM 990009

Ordered as 990009-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump subassembly, 21.0 cm3/r [1.28 in3/r] displacement, clockwise

OEM 101003

Ordered as 101003-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump kit, 27.9 cm3/r [1.70 in3/r] displacement, counterclockwise

OEM 990010

Ordered as 990010-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump subassembly, 27.9 cm3/r [1.70 in3/r] displacement, counterclockwise

OEM 101004

Ordered as 101004-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump kit, 27.9 cm3/r [1.70 in3/r] displacement, clockwise

OEM 990011

Ordered as 990011-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump subassembly, 27.9 cm3/r [1.70 in3/r] displacement, clockwise

OEM 101005

Ordered as 101005-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump kit, 13.9 cm3/r [0.85 in3/r] displacement, clockwise, auxiliary pressure port

OEM 990433

Ordered as 990433-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump subassembly, 13.9 cm3/r [0.85 in3/r] displacement, clockwise, auxiliary pressure port

OEM 101353

Ordered as 101353-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump kit, 13.9 cm3/r [0.85 in3/r] displacement, counterclockwise, auxiliary pressure port

OEM 990434

Ordered as 990434-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump subassembly, 13.9 cm3/r [0.85 in3/r] displacement, counterclockwise, auxiliary pressure port

OEM 101587

Ordered as 101587-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump kit, 21.0 cm3/r [1.28 in3/r] displacement, counterclockwise, auxiliary pressure port

OEM 990437

Ordered as 990437-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump subassembly, 21.0 cm3/r [1.28 in3/r] displacement, counterclockwise, auxiliary pressure port

OEM 101588

Ordered as 101588-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump kit, 21.0 cm3/r [1.28 in3/r] displacement, clockwise, auxiliary pressure port

OEM 990438

Ordered as 990438-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump subassembly, 21.0 cm3/r [1.28 in3/r] displacement, clockwise, auxiliary pressure port

OEM 101589

Ordered as 101589-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump kit, 27.9 cm3/r [1.70 in3/r] displacement, counterclockwise, auxiliary pressure port

OEM 990441

Ordered as 990441-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump subassembly, 27.9 cm3/r [1.70 in3/r] displacement, counterclockwise, auxiliary pressure port

OEM 101590

Ordered as 101590-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump kit, 27.9 cm3/r [1.70 in3/r] displacement, clockwise, auxiliary pressure port

OEM 990443

Ordered as 990443-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump subassembly, 27.9 cm3/r [1.70 in3/r] displacement, clockwise, auxiliary pressure port

OEM 101591

Ordered as 101591-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump kit, 34.7 cm3/r [2.12 in3/r] displacement, counterclockwise, auxiliary pressure port

OEM 990617

Ordered as 990617-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump subassembly, 34.7 cm3/r [2.12 in3/r] displacement, counterclockwise, auxiliary pressure port

OEM 107161

Ordered as 107161-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump kit, 34.7 cm3/r [2.12 in3/r] displacement, clockwise, auxiliary pressure port

OEM 990598

Eaton parts list 6-610 prints kit number 990598 on two separate lines, once at 34.7 cm3/r clockwise with auxiliary pressure port and once at 27.9 cm3/r counterclockwise with remote filter ports. Confirm the build with us before ordering. Ordered as 990598-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump subassembly, 34.7 cm3/r [2.12 in3/r] displacement, clockwise, auxiliary pressure port

OEM 106532

Ordered as 106532-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump kit, 13.9 cm3/r [0.85 in3/r] displacement, counterclockwise, remote filter ports

OEM 990435

Ordered as 990435-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump subassembly, 13.9 cm3/r [0.85 in3/r] displacement, counterclockwise, remote filter ports

OEM 103049

Ordered as 103049-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump kit, 21.0 cm3/r [1.28 in3/r] displacement, counterclockwise, remote filter ports

OEM 990439

Ordered as 990439-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump subassembly, 21.0 cm3/r [1.28 in3/r] displacement, counterclockwise, remote filter ports

OEM 103066

Ordered as 103066-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump kit, 27.9 cm3/r [1.70 in3/r] displacement, counterclockwise, remote filter ports

OEM 990598

Eaton parts list 6-610 prints kit number 990598 on two separate lines, once at 34.7 cm3/r clockwise with auxiliary pressure port and once at 27.9 cm3/r counterclockwise with remote filter ports. Confirm the build with us before ordering. Ordered as 990598-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump subassembly, 27.9 cm3/r [1.70 in3/r] displacement, counterclockwise, remote filter ports

OEM 105553

Ordered as 105553-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump kit, 21.0 cm3/r [1.28 in3/r] displacement, clockwise, remote filter ports

OEM 990440

Ordered as 990440-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the standard charge pump: charge pump subassembly, 21.0 cm3/r [1.28 in3/r] displacement, clockwise, remote filter ports

OEM 103678

Ordered as 103678-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the A-pad charge pump: charge pump kit, 13.9 cm3/r [0.85 in3/r] displacement, counterclockwise, auxiliary pressure port

OEM 990612

Ordered as 990612-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the A-pad charge pump: charge pump subassembly, 13.9 cm3/r [0.85 in3/r] displacement, counterclockwise, auxiliary pressure port

OEM 105119

Ordered as 105119-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the A-pad charge pump: charge pump kit, 13.9 cm3/r [0.85 in3/r] displacement, clockwise

OEM 990352

Ordered as 990352-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the A-pad charge pump: charge pump subassembly, 13.9 cm3/r [0.85 in3/r] displacement, clockwise

OEM 103342

Ordered as 103342-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the A-pad charge pump: charge pump kit, 13.9 cm3/r [0.85 in3/r] displacement, counterclockwise

OEM 990353

Ordered as 990353-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the A-pad charge pump: charge pump subassembly, 13.9 cm3/r [0.85 in3/r] displacement, counterclockwise

OEM 103343

Ordered as 103343-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the A-pad charge pump: charge pump kit, 21.0 cm3/r [1.28 in3/r] displacement, clockwise

OEM 990354

Ordered as 990354-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the A-pad charge pump: charge pump subassembly, 21.0 cm3/r [1.28 in3/r] displacement, clockwise

OEM 103344

Ordered as 103344-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the A-pad charge pump: charge pump kit, 21.0 cm3/r [1.28 in3/r] displacement, counterclockwise

OEM 990355

Ordered as 990355-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the A-pad charge pump: charge pump subassembly, 21.0 cm3/r [1.28 in3/r] displacement, counterclockwise

OEM 103345

Ordered as 103345-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the A-pad charge pump: charge pump kit, 21.0 cm3/r [1.28 in3/r] displacement, clockwise, auxiliary pressure port

OEM 990446

Ordered as 990446-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the A-pad charge pump: charge pump subassembly, 21.0 cm3/r [1.28 in3/r] displacement, clockwise, auxiliary pressure port

OEM 103470

Ordered as 103470-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the A-pad charge pump: charge pump kit, 27.9 cm3/r [1.70 in3/r] displacement, clockwise

OEM 990356

Ordered as 990356-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the A-pad charge pump: charge pump subassembly, 27.9 cm3/r [1.70 in3/r] displacement, clockwise

OEM 103346

Ordered as 103346-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the A-pad charge pump: charge pump kit, 27.9 cm3/r [1.70 in3/r] displacement, counterclockwise

OEM 990357

Ordered as 990357-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the A-pad charge pump: charge pump subassembly, 27.9 cm3/r [1.70 in3/r] displacement, counterclockwise

OEM 103347

Ordered as 103347-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the A-pad charge pump: charge pump kit, 27.9 cm3/r [1.70 in3/r] displacement, clockwise, remote filter ports

OEM 990449

Ordered as 990449-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the A-pad charge pump: charge pump subassembly, 27.9 cm3/r [1.70 in3/r] displacement, clockwise, remote filter ports

OEM 103472

Ordered as 103472-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the A-pad charge pump: charge pump kit, 34.7 cm3/r [2.12 in3/r] displacement, counterclockwise, auxiliary pressure port

OEM 990600

Ordered as 990600-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the A-pad charge pump: charge pump subassembly, 34.7 cm3/r [2.12 in3/r] displacement, counterclockwise, auxiliary pressure port

OEM 107950

Ordered as 107950-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the A-pad charge pump: charge pump kit, 27.9 cm3/r [1.70 in3/r] displacement, counterclockwise, auxiliary pressure port

OEM 990610

Ordered as 990610-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the A-pad charge pump: charge pump subassembly, 27.9 cm3/r [1.70 in3/r] displacement, counterclockwise, auxiliary pressure port

OEM 104756

Ordered as 104756-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the A-pad charge pump: charge pump kit, 21.0 cm3/r [1.28 in3/r] displacement, counterclockwise, auxiliary pressure port

OEM 990611

Ordered as 990611-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the A-pad charge pump: charge pump subassembly, 21.0 cm3/r [1.28 in3/r] displacement, counterclockwise, auxiliary pressure port

OEM 105189

Ordered as 105189-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the B-pad charge pump: charge pump kit, 13.9 cm3/r [0.85 in3/r] displacement, clockwise

OEM 990346

Ordered as 990346-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the B-pad charge pump: charge pump subassembly, 13.9 cm3/r [0.85 in3/r] displacement, clockwise

OEM 103336

Ordered as 103336-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the B-pad charge pump: charge pump kit, 13.9 cm3/r [0.85 in3/r] displacement, counterclockwise

OEM 990347

Ordered as 990347-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the B-pad charge pump: charge pump subassembly, 13.9 cm3/r [0.85 in3/r] displacement, counterclockwise

OEM 103337

Ordered as 103337-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the B-pad charge pump: charge pump kit, 21.0 cm3/r [1.28 in3/r] displacement, clockwise

OEM 990348

Ordered as 990348-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the B-pad charge pump: charge pump subassembly, 21.0 cm3/r [1.28 in3/r] displacement, clockwise

OEM 103338

Ordered as 103338-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the B-pad charge pump: charge pump kit, 21.0 cm3/r [1.28 in3/r] displacement, counterclockwise

OEM 990349

Ordered as 990349-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the B-pad charge pump: charge pump subassembly, 21.0 cm3/r [1.28 in3/r] displacement, counterclockwise

OEM 103339

Ordered as 103339-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the B-pad charge pump: charge pump kit, 21.0 cm3/r [1.28 in3/r] displacement, clockwise, auxiliary pressure port

OEM 990447

Ordered as 990447-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the B-pad charge pump: charge pump subassembly, 21.0 cm3/r [1.28 in3/r] displacement, clockwise, auxiliary pressure port

OEM 103441

Ordered as 103441-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the B-pad charge pump: charge pump kit, 21.0 cm3/r [1.28 in3/r] displacement, counterclockwise, auxiliary pressure port

OEM 990448

Ordered as 990448-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the B-pad charge pump: charge pump subassembly, 21.0 cm3/r [1.28 in3/r] displacement, counterclockwise, auxiliary pressure port

OEM 103444

Ordered as 103444-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the B-pad charge pump: charge pump kit, 27.9 cm3/r [1.70 in3/r] displacement, clockwise

OEM 990350

Ordered as 990350-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the B-pad charge pump: charge pump subassembly, 27.9 cm3/r [1.70 in3/r] displacement, clockwise

OEM 103340

Ordered as 103340-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the B-pad charge pump: charge pump kit, 27.9 cm3/r [1.70 in3/r] displacement, counterclockwise

OEM 990351

Ordered as 990351-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the B-pad charge pump: charge pump subassembly, 27.9 cm3/r [1.70 in3/r] displacement, counterclockwise

OEM 103341

Ordered as 103341-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the B-pad charge pump: charge pump kit, 34.7 cm3/r [2.12 in3/r] displacement, clockwise

OEM 990603

Ordered as 990603-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the B-pad charge pump: charge pump subassembly, 34.7 cm3/r [2.12 in3/r] displacement, clockwise

OEM 106534

Ordered as 106534-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the wet A-pad charge pump: charge pump kit, 13.9 cm3/r [0.85 in3/r] displacement, counterclockwise

OEM 990843

Ordered as 990843-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the wet A-pad charge pump: charge pump subassembly, 13.9 cm3/r [0.85 in3/r] displacement, counterclockwise

OEM 111343

Ordered as 111343-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the wet A-pad charge pump: charge pump kit, 21.0 cm3/r [1.28 in3/r] displacement, clockwise, external discharge port

OEM 990844

Ordered as 990844-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the wet A-pad charge pump: charge pump subassembly, 21.0 cm3/r [1.28 in3/r] displacement, clockwise, external discharge port

OEM 110164

Ordered as 110164-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the wet A-pad charge pump: charge pump kit, 21.0 cm3/r [1.28 in3/r] displacement, counterclockwise, external discharge port

OEM 990845

Ordered as 990845-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the wet A-pad charge pump: charge pump subassembly, 21.0 cm3/r [1.28 in3/r] displacement, counterclockwise, external discharge port

OEM 111226

Ordered as 111226-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the wet A-pad charge pump: charge pump kit, 21.0 cm3/r [1.28 in3/r] displacement, clockwise, remote filter ports

OEM 990846

Ordered as 990846-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the wet A-pad charge pump: charge pump subassembly, 21.0 cm3/r [1.28 in3/r] displacement, clockwise, remote filter ports

OEM 109704

Ordered as 109704-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the wet A-pad charge pump: charge pump kit, 27.9 cm3/r [1.70 in3/r] displacement, clockwise, external discharge port

OEM 990847

Ordered as 990847-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the wet A-pad charge pump: charge pump subassembly, 27.9 cm3/r [1.70 in3/r] displacement, clockwise, external discharge port

OEM 110086

Ordered as 110086-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the wet A-pad charge pump: charge pump kit, 27.9 cm3/r [1.70 in3/r] displacement, counterclockwise, external discharge port

OEM 990848

Ordered as 990848-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the wet A-pad charge pump: charge pump subassembly, 27.9 cm3/r [1.70 in3/r] displacement, counterclockwise, external discharge port

OEM 110540

Ordered as 110540-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the wet B-pad charge pump: charge pump kit, 21.0 cm3/r [1.28 in3/r] displacement, clockwise, remote filter ports

OEM 990627

Ordered as 990627-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the wet B-pad charge pump: charge pump subassembly, 21.0 cm3/r [1.28 in3/r] displacement, clockwise, remote filter ports

OEM 107777

Ordered as 107777-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the wet B-pad charge pump: charge pump kit, 21.0 cm3/r [1.28 in3/r] displacement, clockwise

OEM 990629

Ordered as 990629-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the wet B-pad charge pump: charge pump subassembly, 21.0 cm3/r [1.28 in3/r] displacement, clockwise

OEM 107227

Ordered as 107227-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the wet B-pad charge pump: charge pump kit, 21.0 cm3/r [1.28 in3/r] displacement, clockwise, external discharge port

OEM 990630

Ordered as 990630-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the wet B-pad charge pump: charge pump subassembly, 21.0 cm3/r [1.28 in3/r] displacement, clockwise, external discharge port

OEM 107500

Ordered as 107500-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the wet B-pad charge pump: charge pump kit, 21.0 cm3/r [1.28 in3/r] displacement, counterclockwise, external discharge port

OEM 990631

Ordered as 990631-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the wet B-pad charge pump: charge pump subassembly, 21.0 cm3/r [1.28 in3/r] displacement, counterclockwise, external discharge port

OEM 107978

Ordered as 107978-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the wet B-pad charge pump: charge pump kit, 27.9 cm3/r [1.70 in3/r] displacement, clockwise

OEM 990632

Ordered as 990632-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the wet B-pad charge pump: charge pump subassembly, 27.9 cm3/r [1.70 in3/r] displacement, clockwise

OEM 108629

Ordered as 108629-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the wet B-pad charge pump: charge pump kit, 27.9 cm3/r [1.70 in3/r] displacement, clockwise, remote filter ports

OEM 990628

Ordered as 990628-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Ref 54

Fits the wet B-pad charge pump: charge pump subassembly, 27.9 cm3/r [1.70 in3/r] displacement, clockwise, remote filter ports

OEM 108364

Ordered as 108364-XXX by relief valve setting. Tell us the setting and we will confirm the exact number.

Qty 1

Pump Control, Ref 23: control kits and subassemblies 5 parts

Ref 23

Fits the manual displacement pump control, Models 33 through 64: control kit, option A, neutral lockout switch

OEM 990076

Eaton numbers every control kit and subassembly below with a suffix for the control valve orifice size. Each kit contains a control subassembly and the matching mounting bolts and gasket; a subassembly on its own does not include them. Tell us the orifice size, or the full number from the old control, and we will confirm the exact part number before we quote. Ordered as 990076-XXX by control valve orifice size. Tell us the orifice size and we will confirm the exact number.

Qty 1

Ref 23

Fits the manual displacement pump control, Models 33 through 64: control subassembly, option A, neutral lockout switch

OEM 102772

Ordered as 102772-XXX by control valve orifice size. Tell us the orifice size and we will confirm the exact number.

Qty 1

Ref 23

Fits the manual displacement pump control, Models 33 through 64: control subassembly, option B, neutral lockout switch, inching valve and linkage for pressure override

OEM 103083

Ordered as 103083-XXX by control valve orifice size. Tell us the orifice size and we will confirm the exact number.

Qty 1

Ref 23

Fits the manual displacement pump control, Models 33 through 64: control subassembly, option C, neutral lockout switch and linkage for pressure override

OEM 102781

Ordered as 102781-XXX by control valve orifice size. Tell us the orifice size and we will confirm the exact number.

Qty 1

Ref 23

Fits the manual displacement pump control, Models 33 through 64: control subassembly, option D, neutral lockout switch and inching valve

OEM 105226

Ordered as 105226-XXX by control valve orifice size. Tell us the orifice size and we will confirm the exact number.

Qty 1