Answers to the questions we get every day about parts, quotes, shipping, warranty and repair, plus short answers to the technical questions buyers ask most, each linked to the full guide. If yours is not here, send us the part number and we will reply with price, availability and lead time.
Parts, quotes and ordering
Do you supply obsolete or discontinued hydraulic parts?
Yes, it is our specialty. Our catalog holds over 40,000 part numbers, with roughly 55,000 more we can source to order, including parts dropped from manufacturer catalogs years ago. Send us the number from your nameplate and we will trace it. If it is an obsolete Vickers valve, start with our obsolete Vickers valve replacements.
Which brands do you cover?
Vickers / Eaton, Char-Lynn, Parker Hannifin, Denison, Bosch Rexroth, Sundstrand / Sauer-Danfoss, Oilgear, Poclain, Kawasaki, Racine and Muncie Power Products. Every brand has its own page under Shop by Brand.
Are your parts genuine OEM or aftermarket?
Both. Unless a listing says Genuine OEM, the part is a new aftermarket part made to meet or exceed the original specification. Listings for genuine OEM parts say so in the title.
Why does a part show Request a Quote instead of a price?
Those are parts we price on request, usually because cost and availability change or the part is sourced to order. If you see $0.01 on a shopping or AI listing, that is a placeholder for the same thing, not the selling price. Send the part number through our quote form and we will come back with price, availability and lead time.
What does a quote include?
Most quotes include price, availability and lead time.
How fast do you ship, and do you ship outside the US?
In-stock parts ship within 24-72 hours. We ship across the United States and worldwide, and shipping is calculated at checkout.
How can I pay?
At checkout you can pay by credit card, Shop Pay, Apple Pay or Google Pay.
What is your return policy?
You have 30 days from receipt to request a return. Approved returns carry a 25% restocking fee, and there is no fee when we shipped the wrong part or it arrived damaged or defective. Installed, modified or disassembled parts cannot be returned. Full terms are in our refund policy.
Warranty, repair and selling to us
What warranty do you offer on parts?
In-stock parts carry a 2-year warranty. Genuine OEM parts carry the applicable manufacturer warranty.
Do you repair and rebuild pumps and motors?
Yes. Our shop repairs and rebuilds hydraulic pumps, motors and valves across the brands we carry. The teardown evaluation is free, you get a firm, itemized quote before any billable work, and repair work done in our shop carries a 1-year warranty, which is separate from the 2-year parts warranty. See repair and rebuild service, hydraulic motor rebuilds and Rexroth A10 pump rebuilds.
Do you send repairs to other shops?
Sometimes. We repair your unit in our shop in Lake Orion, Michigan, or route it through the RestoPower repair network when a network shop closer to you can turn it around faster. We tell you before any work starts, and the price, turnaround and warranty for a network job are confirmed on your quote.
Is it worth rebuilding, or should I buy new?
It depends on the unit, the damage and how long a new one takes to arrive. Rebuilding usually wins on obsolete units, OEM specials and anything with a sound housing and shaft. Our hydraulic pump repair cost guide walks through the three repair brackets, and the free evaluation gives you a real number.
Do you buy surplus parts or used cores?
Yes. We buy new-old-stock hydraulic parts and give credit for worn, damaged and seized cores. See we buy new old stock and core buyback.
Finding the right part
How do I identify my hydraulic pump or motor?
Start with the model code on the nameplate and use the decoder for your brand. If the tag is missing or unreadable, work out the type from its shape, then look for numbers stamped into the casting and the parts inside. Our guide to identifying a pump or motor with no tag links every brand decoder.
What should I send when I ask for a quote?
The full model code from the nameplate, any part numbers you have, the quantity, and the machine or application. Photos of the tag, the shaft and the ports help when the tag is worn.
Which seal kit fits my Char-Lynn motor?
The family and the design code in the product number pick the kit, not the middle digits. Use the Char-Lynn part number decoder and seal kit finder. Eaton builds some motors specially for equipment makers, so compare your old seals with the kit before you install it.
Viton, Buna or EPDM: which seal material do I need?
Buna-N (nitrile) suits mineral oil at normal temperatures, Viton suits heat and aggressive fluids, and EPDM is the kit for phosphate ester fluids such as Skydrol. Viton is not the phosphate ester kit. Details in the hydraulic seal materials guide and seal materials by brand.
Technical questions
What is a case drain, and how much flow is too much?
The case drain carries a pump or motor's internal leakage back to tank. Test it with a flow meter at operating temperature and full pressure. Too much is whatever the factory figure for your unit says, or a big rise over the reading when the unit was new. See the case drain flow test guide, which lists the factory figures we found.
How do I start up a pump after a rebuild or replacement?
Fill the case with clean oil through the highest case drain port, fill the inlet line, jog the motor to confirm rotation, then start the pump unloaded and let it purge air at low pressure before you load it in steps. Full procedure in our hydraulic pump start-up guide.
How do I tell which way my pump rotates?
Look at the pump from the shaft end. Clockwise is right hand (R) and counterclockwise is left hand (L), and the rotation letter in the model code tells you which one it was built for. Vickers V and VQ vane pumps can be reversed in the field; most piston pumps need different parts. See hydraulic pump rotation.
Why is my hydraulic pump whining, overheating or not building pressure?
Noise is usually cavitation or air at the inlet, heat is usually oil going over a relief or through worn internals, and low pressure is often a relief or compensator setting before it is a worn pump. Start with pump noise, pump overheating and pump not building pressure.
Why is my orbital motor slow, weak or leaking at the shaft?
A slow or weak Char-Lynn motor is usually short on flow or pressure, or fighting back pressure, and a leaking shaft seal is usually being pushed out by case pressure. Put gauges on both ports and the case before you pull it. See Char-Lynn motor troubleshooting and the rebuild guide.
Why is my hydraulic steering hard or wandering?
It is usually the supply or the cylinder, not the steering unit: low pump flow, a relief or priority valve set too low, a leaking load-sensing line or a cylinder leaking past its piston. See steering unit troubleshooting.
Why won't my hydrostatic drive move?
Check charge pressure first. Low charge pressure, a bypass valve left open, a leaking or misset loop valve, or a pump that is not truly in neutral cause most hydrostatic complaints. See hydrostatic transmission troubleshooting.
What oil and cleanliness does my pump need?
Pick the oil grade that keeps viscosity inside your pump's optimum band at running temperature (16-40 cSt for Vickers vane and piston pumps, 20-43 cSt for Char-Lynn motors), and keep the oil to the factory cleanliness code. See the oil viscosity guide and ISO cleanliness and flushing.
How do I set a pump compensator?
Only to the machine maker's figure, and never past the factory range. We publish the procedures and ranges for Vickers PVH, PVB, PVQ and PVE pumps and the Rexroth A10VSO.
All guides and decoders
Identification and decoders
- Identify a pump or motor with no tag
- How to identify a Vickers pump
- Vickers DG4V / DG5V valve decoder
- Char-Lynn decoder and seal kit finder
- Denison model code decoder
- Rexroth A10VSO / A10VO decoder
- Sauer-Danfoss Series 90 decoder
- Sundstrand / Sauer-Danfoss identification
- Parker pump identification
- Kawasaki pump identification
- Oilgear pump identification
- Poclain MS motor identification
Troubleshooting
- Char-Lynn orbital motor troubleshooting
- Char-Lynn steering unit troubleshooting
- Hydrostatic transmission troubleshooting
- Rexroth A10VSO troubleshooting
- Case drain flow test
Rebuild and setup
- Pump start-up procedure
- Pump rotation: tell it and change it
- Vickers vane cartridge kit rebuild
- Char-Lynn motor rebuild guide
- Parker Torqmotor rebuild guide
- Vickers compensator adjustment
- Rexroth A10VSO compensator adjustment
Fluids, seals and basics
- Oil viscosity by pump type
- ISO cleanliness codes and flushing
- Hydraulic seal materials guide
- How hydraulic motors work
- Popular hydraulic pump questions
- Hydraulic calculator
Still stuck? Send us the nameplate
Give us the full model code, what the unit is doing and the machine it is on. We will tell you whether it is a part, a seal kit, a setting or a rebuild. In-stock parts ship within 24-72 hours and carry a 2-year warranty, and repair work done in our shop carries a 1-year warranty.