Vickers PVH131 / PVH141parts breakdown
Complete component breakdown for the Vickers PVH131 and PVH141 variable-displacement piston pumps (11 design). 180 parts total — saleable kits and components have product pages, sub-components are reference.
180 parts across 14 categories
Source: Eaton/Vickers M-2209-S, Revised 05/01/97, 11 Design
Seal Kit
22 parts
SEAL-001
Double shaft seal kit (parent)
Parent kit. Contains shaft seals, retaining rings, and all listed o-rings flagged as kit contents in service data.
Qty 1
SEAL-002
Shaft seal
Qty 1 if single seal config (-S), qty 2 if dual seal config (-D). Inner seal faces bearing; outer faces shaft end.
Qty 2
SEAL-004
O-ring, valve block to housing
Also used in IC control kit.
Qty 2
SEAL-005
O-ring, multi-use
Used in valve block (513602 plug) and C/CM control.
Qty 1
SEAL-006
O-ring, multi-use
Used at 181792 plug, IC control, CV control.
Qty 1
SEAL-007
O-ring, valve block plug
Qty 1
SEAL-008
O-ring, bias group
Used twice in non-torque bias group.
Qty 2
SEAL-010
O-ring, controls common
Most-used o-ring across controls: 3 in CV, 2 in IC, 5 in T option. Default qty 5 for full T config.
Qty 5
SEAL-013
O-ring, T option (multi)
T option; appears in connector and retainer assemblies.
Qty 2
SEAL-018
Back-up ring, bias torque
Torque bias group.
Qty 1
SEAL-019
O-ring, bias torque
Torque bias group.
Qty 1
SEAL-020
O-ring, bias torque
Torque bias group.
Qty 1
SEAL-022
Gasket, valve block
Qty 1
Bearings
3 parts
BRG-002
Bearing sub-assembly, drive end
Available in bearing kit 877426.
Qty 1
BRG-003
Bearing sub-assembly, opposite end
Available in bearing kit 877426.
Qty 1
Yoke / Saddle Group
10 parts
YOKE-001
Bearing/yoke kit (parent)
Parent kit. Contains yoke S/A, screws, saddle bearings.
Qty 1
YOKE-003
Screw, yoke (2 req'd)
Torque 3.6-4.4 N·m (2.3-3.0 lb·ft). In kit 02-334838. | Alternate/superseded part number: 114995-010
Qty 2
YOKE-008
Bearing-related part [VERIFY]
Listed near bearing S/A in service data; confirm function and usage.
Qty 1
YOKE-009
Bearing-related part [VERIFY]
Listed near bearing S/A in service data; confirm function and usage.
Qty 1
YOKE-010
Bearing-related part [VERIFY]
Listed near bearing S/A in service data; confirm function and usage.
Qty 1
Shaft & Drive
11 parts
SHAFT-008
Shaft, 13 straight keyed (SAE-CC)
Standard non-thru-drive shaft. Uses key 140282.
Qty 1
SHAFT-010
Shaft spacer kit
Use shims as required to obtain 0.01-0.10 mm (.0004-.004 in.) axial shaft end play.
Qty 1
Rotating Group
15 parts
ROT-001
Rotating group kit, PVH131 (parent)
Parent kit, PVH131 only. Contains cylinder block, piston & shoe S/A, shoe cage, plus shared springs/guides.
Qty 1
ROT-003
Piston & shoe sub-assembly, PVH131 (set of 9)
PVH131 only. Matched set of 9 pistons. Do not mix with originals. In kit 877419.
Qty 1
ROT-007
Piston & shoe sub-assembly, PVH141 (set of 9)
PVH141 only. Matched set of 9 pistons. Do not mix with originals. In kit 02-322898.
Qty 1
Valve Plate
10 parts
VP-005
Valve plate, PVH131QP RH
PVH131 QP (quiet power unit), RH only — QP is RH rotation only.
Qty 1
VP-010
Valve plate, PVH141QP RH
PVH141 QP (quiet power unit), RH only — QP is RH rotation only.
Qty 1
Valve Block
27 parts
VB-003-RH
Valve block, SF-11-C RH rotation
SAE flange ports, compensator + adjustable stop (S option)
Qty 1
VB-003-LH
Valve block, SF-11-C LH rotation
SAE flange ports, compensator + adjustable stop (S option)
Qty 1
VB-004-RH
Valve block, SM-11-C RH rotation
Metric threads, compensator + adjustable stop (S option)
Qty 1
VB-004-LH
Valve block, SM-11-C LH rotation
Metric threads, compensator + adjustable stop (S option)
Qty 1
VB-005-RH
Valve block, F-11-CT RH rotation
SAE flange ports, compensator + torque limiter (T option)
Qty 1
VB-005-LH
Valve block, F-11-CT LH rotation
SAE flange ports, compensator + torque limiter (T option)
Qty 1
VB-006-RH
Valve block, M-11-CT RH rotation
Metric threads, compensator + torque limiter (T option)
Qty 1
VB-006-LH
Valve block, M-11-CT LH rotation
Metric threads, compensator + torque limiter (T option)
Qty 1
VB-007-RH
Valve block, LAF-11-C RH rotation
SAE flange ports, A thru-drive, compensator
Qty 1
VB-007-LH
Valve block, LAF-11-C LH rotation
SAE flange ports, A thru-drive, compensator
Qty 1
VB-008-RH
Valve block, LAM-11-C RH rotation
Metric threads, A thru-drive, compensator
Qty 1
VB-008-LH
Valve block, LAM-11-C LH rotation
Metric threads, A thru-drive, compensator
Qty 1
VB-009-RH
Valve block, LAF-11-CT RH rotation
SAE flange ports, A thru-drive, compensator + T option
Qty 1
VB-009-LH
Valve block, LAF-11-CT LH rotation
SAE flange ports, A thru-drive, compensator + T option
Qty 1
VB-010-RH
Valve block, LAM-11-CT RH rotation
Metric threads, A thru-drive, compensator + T option
Qty 1
VB-010-LH
Valve block, LAM-11-CT LH rotation
Metric threads, A thru-drive, compensator + T option
Qty 1
VB-100
Screw, valve block large (2 req'd)
Torque 257-315 N·m (190-232 lb·ft). Used in main assy AND thru-drive section.
Qty 2
VB-101
Screw, valve block (4 req'd)
Torque 103-127 N·m (76-94 lb·ft) main assy; 83-102 N·m (61-75 lb·ft) thru-drive.
Qty 4
Bias Group (Non-Torque)
5 parts
BIAS-N-001
Bias piston, non-torque
Standard bias piston for C/CM/CMV/CV/IC controls (no T).
Qty 1
Bias Group (Torque)
5 parts
Control Group (C/CM)
13 parts
CTL-C-001
Control kit, C compensator (parent)
Parent kit. C compensator, 140-280 bar (2000-4000 psi). [VERIFY: service data table shows 70-250 bar in one location, 140-280 in model code section — confirm with current Eaton documentation.]
Qty 1
CTL-C-002
Control kit, CM compensator (parent)
Parent kit. CM compensator, 35-140 bar (500-2000 psi). [VERIFY: service data table shows 40-130 bar in one location — confirm with current Eaton documentation.]
Qty 1
CTL-C-007
Control spring, 35-140 bar
Used in CM and CMV kits (35-140 bar range). Also in T option.
Qty 1
CTL-C-011
Nut, adjusting screw
Torque 14-20 N·m (10-14 lb·ft). Used across most control kits.
Qty 2
Control Group (CV/CMV/CVB)
11 parts
CTL-CV-001
Control kit, CV load-sense + comp (parent)
Parent kit. CV: load sense + pressure compensator, 140-280 bar.
Qty 1
CTL-CV-002
Control kit, CVB load-sense + comp + bleed (parent)
Parent kit. CVB: load sense + comp + internal bleed-down (.15" orifice), 140-280 bar.
Qty 1
CTL-CV-003
Control kit, CMV load-sense + comp (parent)
Parent kit. CMV: load sense + pressure compensator, 35-140 bar.
Qty 1
CTL-CV-010
Body, CV/CMV
Distinct from 857733; check with diagram which body fits which sub-variant.
Qty 1
Control Group (IC)
12 parts
CTL-IC-001
Control kit, IC inch threads (parent)
Parent kit. IC = CETOP 3 interface compensator. 20 bar factory differential. QI/QP models only. Inch threads, body 883386.
Qty 1
CTL-IC-002
Control kit, IC metric threads (parent)
Parent kit. IC = CETOP 3 interface compensator. 20 bar factory differential. Metric threads, body 860628.
Qty 1
CTL-IC-007
Plug, IC small (3 req'd)
Torque 9.8-10.2 N·m (7.2-7.5 lb·ft). Uses 396092 o-ring.
Qty 3
CTL-IC-010
Plug, IC plug 113000
Torque 5.1-5.9 N·m (3.7-4.4 lb·ft) IC; 15-17 N·m T option. Used in both.
Qty 1
Control Group (T)
16 parts
CTL-T-001
Control kit, CT-31 torque limiter (parent)
Parent kit. C**T**-31 — standard torque control.
Qty 1
CTL-T-002
Control kit, CTS-31 torque + summation (parent)
Parent kit. C**T**S-31 — torque control with summation feature.
Qty 1
CTL-T-005
Check valve, T option
Torque 1.7-2.3 N·m (2.3-3.1 lb·ft) [VERIFY units — service data shows lb·ft figure higher than N·m which is unusual].
Qty 1
CTL-T-009
Connector, summation only
CTS (summation) feature only. Also referenced as retainer ring.
Qty 1
CTL-T-013
Plug, T option large 860655
Torque 75-83 N·m (102-112 lb·ft) [VERIFY units].
Qty 1
Thru-Drive
20 parts
TD-007
Adapter pad kit, SAE-B/BB
B/C thru-drive built from A thru-drive pump + this adapter kit.
Qty 1
TD-008
Adapter pad kit, SAE-C/CC
B/C thru-drive built from A thru-drive pump + this adapter kit.
Qty 1
TD-011
Adapter flange [VERIFY which model]
[VERIFY — multi-column layout in service data PDF; confirm which thru-drive variant this fits].
Qty 1
TD-017
Cover plate, SAE-A 2-bolt
Fits -031 suffix pumps (SAE-A 2-bolt cover plate config).
Qty 1
TD-018
Screw, AF unit cover plate (2 req'd)
AF (SAE flange thread) thru-drive units only.
Qty 2
TD-019
Screw, AM unit cover plate (2 req'd)
AM (metric thread) thru-drive units only.
Qty 2
No parts match your search.