Oilgear PVG100207 Bushing Retaining Pin PVG 100
Oilgear PVG100207 Bushing Retaining Pin PVG 100
Need other parts for this rebuild?
We have access to 30,000+ parts that aren't listed on the site. Send us your part list and we'll quote it.
Seeing "Request a quote" on a part? That doesn't mean we don't have it. Send us the part number and we'll get back to you with price and availability.
Request a quoteOilgear PVG100207 Bushing Retaining Pin is a new OEM or aftermarket equivalent replacement for Oilgear PVG piston pumps, supplied by RestoPower. Built to meet or exceed the original Oilgear specification for a precise, dependable fit.
Sold as one pin. The Oilgear part number PVG100207 is typically sold as a single pin, and that is what this listing is. A PVG 100 uses two, one under each swashblock bearing, so order a quantity of two for a full pump, or buy the pair in one click.
Complete the rebuild. These pins sit under the swashblock bearings, so the pump has to come apart to reach them. Reseal it while it is open.
Oilgear K516175_C11 Seal Kit PVG 100 PVG 130Fits PVG 100 and PVG 130, add it to the same orderSpecifications
| OEM Part Number | PVG100207 |
| Part Type | Bushing Retaining Pin |
| Brand | OEM or aftermarket equivalent to Oilgear |
| Sold As | One pin. PVG100207 is typically sold as a single pin |
| Series | Oilgear PVG 100 piston pump |
| Oilgear Designation | Pin, Roll, item 207 on the PVG parts list. Called Pin, Swashblock Bearing on the PVG 100 / 130 F1U list |
| Quantity Per Pump | 2, one under each swashblock bearing |
| Function | Pressed into the pump housing to locate the two swashblock bearings so they cannot rotate or walk |
| Installed Height | Must stand 0.050 to 0.065 in, 1.3 to 1.6 mm, proud of the case |
| Material | Ground hardened steel |
| Condition | New |
| Warranty | 2-Year Warranty |
| Availability | In stock, ships within 24-72 hours |
Compatible With
- Oilgear PVG 100
- Oilgear PVG 130, confirm against your nameplate before ordering
- Send us the model from your nameplate and we will check it the same day
Cross Reference
PVG100207, Oilgear PVG100207
Common Applications
- High pressure industrial hydraulic power units
- Press, forging and die casting machinery
- Steel mill and heavy process equipment
- Rebuild and overhaul of Oilgear PVG pumps on the bench
Guides & Catalogs
Frequently Asked Questions
How many do I need?
Two per pump. Oilgear lists this pin at a quantity of two, one under each of the two swashblock bearings. This listing is a single pin, matching how the part number is normally sold, so set the quantity to two for a full pump or buy the pair.
What does this pin do?
It is pressed into the pump housing and the swashblock bearing seats over it, which stops the bearing rotating or walking under load. A missing or sheared pin lets a bearing turn in its bore, which wears the housing and takes the pump with it. On reassembly the pin has to stand 0.050 to 0.065 in proud of the case, and it must not protrude far enough to foul the bearing.
Will the Oilgear PVG100207 fit my unit?
It is a direct OEM equivalent for PVG100207. Send the model from your nameplate to info@restopower.com and we will confirm fitment the same day.
Is this genuine OEM or aftermarket?
New OEM or aftermarket equivalent, manufactured to meet or exceed the original Oilgear specification and backed by our 2-year warranty.
About RestoPower
RestoPower specializes in hard-to-find and obsolete hydraulic components, Oilgear, Parker, Vickers, Eaton, Denison, Char-Lynn, Rexroth and more. Email info@restopower.com or call (810) 882-1171 for fitment help.