Char-Lynn H Series Hydraulic Motor Parts Breakdown
Parts for the Eaton Char-Lynn H Series (101-) general purpose motor, designs -007, -008 and -009, from Eaton's 2015 parts and repair manual and the 1998 parts bulletin. Motors built for an equipment OEM can differ, so send your full model code.
127 parts across 11 categories
Source: Eaton Char-Lynn H Series parts and repair manual E-MOGG-RR003-E, October 2015; Eaton parts information 6-121, February 1998
Tap a diagram to zoom in.
Seal Kits 4 parts
Seal kit, Buna-N
Fits designs -008 and -009. Viton version is 60545-000. Motors built for an equipment OEM can use a different seal set.
Qty 1
Seal kit, Viton
Fits designs -008 and -009. Buna-N version is 60540-000. Motors built for an equipment OEM can use a different seal set.
Qty 1
Seal kit, Buna-N
Fits design -007. Viton version is 60032-000. Motors built for an equipment OEM can use a different seal set.
Qty 1
Seal kit, Viton
Fits design -007. Buna-N version is 60023-000. Motors built for an equipment OEM can use a different seal set.
Qty 1
Shaft Seals 6 parts
Seal, exclusion
All designs. Included in seal kits 60023-000, 60032-000, 60540-000 and 60545-000.
Qty 1
Washer, backup
Designs -008 and -009. Not used with pressure seal 6029894-002 or 5995483-001. Included in seal kits 60540-000 (Buna-N) and 60545-000 (Viton).
Qty 1
Seal, pressure
Design -007. Included in seal kits 60023-000 (Buna-N) and 60032-000 (Viton).
Qty 1
Seal, pressure
Designs -008 and -009. Included in seal kits 60540-000 (Buna-N) and 60545-000 (Viton).
Qty 1
Seal, pressure, medium pressure
Design -009 option listed in the 2015 manual. Used without backup washer 22002-000.
Qty 1
Seal, pressure, high pressure
Design -009 option listed in the 2015 manual. Used without backup washer 22002-000.
Qty 1
Shafts & Keys 13 parts
Output shaft, 1 in. straight with Woodruff key slot, speed sensor
Design -009 speed sensor motors.
Qty 1
Key
For the 1 in. straight shafts 7360-001 and 220879-001 and the tapered shaft 7360-018.
Qty 1
Bearings 2 parts
Gerotors 17 parts
Gerotor, 49 cm3/r (3.0 in3/r)
Designs -007 and -008. Design -009 lists it as 46 cm3/r (2.8 in3/r).
Qty 1
Gerotor, 102 cm3/r (6.2 in3/r)
Designs -007 and -008. Design -009 lists it as 96 cm3/r (5.9 in3/r).
Qty 1
Gerotor, 169 cm3/r (10.3 in3/r)
Designs -007 and -008. Design -009 lists it as 159 cm3/r (9.7 in3/r).
Qty 1
Gerotor, 195 cm3/r (11.9 in3/r)
Designs -007 and -008. Design -009 lists it as 185 cm3/r (11.3 in3/r).
Qty 1
Drives & Spacers 19 parts
Housing & Covers 31 parts
End cap, without ports
Designs -007 and -008. The 2015 manual lists 6032761-001 for design -009.
Qty 1
End cap, 7/16-20 O-ring drain port
Designs -007 and -008. The 2015 manual lists 6032761-002 for design -009.
Qty 1
End cap, G 1/4 (BSP) drain port
Designs -007 and -008. The 2015 manual lists 6032761-005 for design -009.
Qty 1
End cap, two 3/4-16 O-ring ports and 7/16-20 O-ring drain port
End ported motors, all designs.
Qty 1
End cap, two G 1/2 (BSP) ports and G 1/4 (BSP) drain port
End ported motors, all designs.
Qty 1
Seals & O-Rings 10 parts
O-ring, housing plug
Designs -007 and -008. Included in seal kits 60023-000 (Buna-N) and 60032-000 (Viton) and seal kits 60540-000 (Buna-N) and 60545-000 (Viton).
Qty 1
O-ring, housing plug
Design -009. Included in seal kits 60540-000 (Buna-N) and 60545-000 (Viton).
Qty 1
Seal, gerotor
Three per motor, four on the 739 displacement. Designs -007 and -008; the 1998 list also shows -009. Included in the seal kits.
Qty 3
Seal, gerotor
Design -009, from the 2015 manual.
Seal, gerotor, 739 displacement
Design -009, 739 displacement only, from the 2015 manual.
Washer, seal
Used with 12 point cap screws only. Replacement screws are 6 point (E10) drive and need no seal washer. Included in the seal kits.
Qty 7
O-ring, housing port plug
For plug 9072-007 on end ported motors. Included in the seal kits.
Qty 2
Hardware 19 parts
Screw, cap, 6 point drive, gerotor end
Displacement 49 on designs -007 and -008; 37 and 46 on design -009. Five per motor on end ported motors.
Qty 7
Screw, cap, 6 point drive, gerotor end
Displacement 74 on designs -007 and -008; 59 and 74 on design -009. Five per motor on end ported motors.
Qty 7
Screw, cap, 6 point drive, gerotor end
Displacement 102 on designs -007 and -008; 96 on design -009. Five per motor on end ported motors.
Qty 7
Screw, cap, 6 point drive, gerotor end
Displacement 120 on design -009. Five per motor on end ported motors.
Qty 7
Screw, cap, 6 point drive, gerotor end
Displacement 146 on design -009. Five per motor on end ported motors.
Qty 7
Screw, cap, 6 point drive, gerotor end
Displacement 169 on designs -007 and -008; 159 on design -009. Five per motor on end ported motors.
Qty 7
Screw, cap, 6 point drive, gerotor end
Displacement 195 on designs -007 and -008; 185 on design -009. Five per motor on end ported motors.
Qty 7
Screw, cap, 6 point drive, gerotor end
Displacement 244 on designs -007 and -008; 231 on design -009. Five per motor on end ported motors.
Qty 7
Screw, cap, 6 point drive, gerotor end
Displacement 277 on designs -007 and -008. Five per motor on end ported motors.
Qty 7
Screw, cap, 6 point drive, gerotor end
Displacement 293 on design -009. Five per motor on end ported motors.
Qty 7
Screw, cap, 6 point drive, gerotor end
Displacement 390 on designs -007 and -008; 370 on design -009. Five per motor on end ported motors.
Qty 7
Screw, cap, 6 point drive, gerotor end
Displacement 739 on design -009. Five per motor on end ported motors. Listed as 16294-552 in the 2015 manual.
Qty 7
Base Block Mounting Kits 5 parts
Seal, O-ring, base block
Part of base block mounting kits 123-1007 and 123-1008. Included in the seal kits.
Qty 2
Other Parts 1 part
No parts match your search.