← Back to Parker Piston Pumps

Parker F2 Twin Flow Bent Axis Truck Pump — Identification Guide

Need parts for a Parker F2 twin-flow bent-axis truck pump? Use the guide below to identify your exact model, then send us the number. We don't stock the F2 on the shelf, but we source hard-to-find and obsolete Parker F2 parts and seal kits and can help you identify the right components.

Hard-to-Find & Obsolete Parts Sourcing
Free Model-Code Identification Help
Buna-N & Viton Seal Options
Fast Quote Turnaround
F2 Frame Sizes & Ratings — Twin Flow, Two Outputs / One Inlet
Model Displacement (Port A / B) Outlet pressure Drive speed Flow A / B @1800 RPM
F2-53/53 54 / 52 cc/rev 5000 PSI (345 bar) 1800 RPM 25.5 / 24.8 GPM
F2-55/28 55 / 28 cc/rev 5000 PSI (345 bar) 1800 RPM 26.1 / 13.3 GPM
F2-70/35 69 / 36 cc/rev 5000 PSI (345 bar) 1800 RPM 32.7 / 17.2 GPM
Twin-flow bent-axis truck pump — two independent output flows from a single inlet · intermittent pressures to 6000 PSI · compact ~42 lb package. Suction fitting ordered separately.
How to Read a Parker F2 Model Code
Series F2 = twin-flow bent-axis truck pump
Frame (A/B) 53/53 · 55/28 · 70/35 (Port A / Port B displacement)
Rotation R right hand (CW) · L left hand (CCW)
🔎 Buna or Viton seals? F2 seal kits are available in both Buna-N (Nitrile) for standard petroleum oil and Viton (Fluorocarbon) for high temperatures or aggressive fluids. Tell us your fluid type and operating temperature and we'll spec the correct seal kit for your rebuild.
How to Identify Your F2
Find the model code on the nameplate — it starts with F2 followed by the twin-flow frame (53/53, 55/28, 70/35) and rotation (R/L). To get the right parts, send us:
  1. The complete model code from the nameplate (or a clear photo).
  2. Your fluid type and operating temperature (to confirm Buna-N vs Viton seals).
  3. What you need — seal kit, rotating group, or complete pump.
Get a quote on Parker F2 parts
Send us your model code and we'll source the correct parts and price them for you.Request an F2 Quote →info@restopower.com | (810) 882-1171 | Request a Quote
Frequently Asked Questions
What is a Parker F2 pump?

A twin-flow bent-axis truck pump that delivers two independent output flows from a single inlet, rated to 5000 PSI. Offered as F2-53/53, F2-55/28 and F2-70/35.

How do I identify my F2?

Read the model code: F2 + twin-flow frame (53/53, 55/28, 70/35) + rotation (R/L). Send us the full code and we'll match the correct parts.

Can RestoPower source obsolete Parker F2 parts?

Yes — sourcing hard-to-find and obsolete Parker parts is our specialty. Send the full model number from your F2 nameplate and we'll locate the correct parts and quote them.

We Buy Cores

Have a used Parker F2 truck pump in any condition? We buy hydraulic cores — get cash back fast.

Get a Quote →