Vickers / Eaton Hydraulic Parts

RestoPower supplies replacement parts, seal kits and rebuild components for Vickers and Eaton hydraulics: vane pumps, piston pumps, hydraulic motors and the full directional, pressure and flow control valve range. Vickers is one of the oldest names in fluid power, so a large share of what people need is discontinued, obsolete and superseded Vickers numbers are the work we do most.

Vickers vane pumps

The V-series and V-Q series cover most industrial Vickers vane pump work. Cartridge kits, shafts, cam rings, vanes, bearings and seal kits are stocked or sourced for all of them.

• V10 vane pump parts and V20 vane pump parts the two most common single vane pumps
• 20V, 25V, 35V and 45V cartridge and service parts
• Vickers vane pump seal kits 1,314 kits by model and shaft type
• VTM42, VTM27 and VTM28 power steering pump parts

Not sure which pump you have? The model code on the nameplate carries the ring size, shaft and port configuration. Our Vickers pump identification guide reads a code block by block, and the V10 and V20 pages list specifications and displacement for each variant.

Vickers piston pumps

Axial piston pumps for industrial and mobile circuits, open and closed loop, fixed and variable displacement.

• PVH piston pump parts 1,252 components
• PVM piston pump parts 1,009 components
• PVQ, PVB and PVE piston pump parts

Rotating groups, valve plates, swashplates, shafts, control assemblies and shaft seal kits. See Vickers piston pumps for the model breakdown.

Vickers hydraulic valves

Valves are where Vickers part numbers get hardest to find, and where most of our sourcing work happens.

• Directional control valves DG4V and DG5V solenoid valves, manual and pilot operated spool valves. The DG4V / DG5V model code decoder breaks down spool type, actuation, voltage and porting.
• Pressure control valves relief valves, pressure reducing valves, sequence valves and unloading valves for accumulator and dual pump circuits.
• Flow control valves pressure compensated and non compensated, with and without check.
• Cartridge valves, solenoid coils and the seal kits for all of the above.

Browse Vickers directional control valves, or if your valve has been discontinued see obsolete Vickers hydraulic valve replacements we cross reference by function and dimension when the number itself is gone.

Vickers hydraulic motors and seal kits

Vickers hydraulic motors covers the vane and piston motor range. For seals, Vickers seal kits and the Vickers gasket cross-reference match a kit to your model, shaft and seal material, gasket numbers are one of the most common things customers arrive with and cannot match.

Individual Vickers component parts

When a rebuild needs one piece rather than a whole kit, a shaft, spool, spring, seat, cover, port plate or retaining ring, those are cataloged separately under Vickers component parts, listed by Vickers part number. A seal kit will not fix a scored shaft or a galled spool; the component will.

Rebuild guides and service data

Exploded views, torque values, clearances and part lists for the common Vickers families are collected in the Vickers rebuild guides, including 20V, 25V, 35V, 45V, 50V, the VQ series, thru-drive VT pumps and the 2520V and 3520V double pumps.

If you would rather we did the work, we repair and rebuild Vickers pumps, motors and valves with free evaluation and a 1-year warranty on the finished unit.

Obsolete and hard to find Vickers numbers

Much of what we ship is never listed online. If Eaton has retired your part number, the replacement is not a drop-in, or you only have a number stamped on a casting, send it to us. We hold new old stock, we rebuild, and we cross reference by dimension and function. Browse the full Vickers parts catalog or the sourceable part number index.

Have a number to check? Request a quote, email info@restopower.com or call (810) 882-1171. We answer availability the same day and ship from Michigan.