Rexroth A10VO100DFR/31R-PUC11N00 Seal Kit - A10VO NG100 Piston Pump

Rexroth A10VO100DFR/31R-PUC11N00 Seal Kit is a new OEM or aftermarket equivalent complete seal kit for the Bosch Rexroth A10VO100DFR/31R-PUC11N00 axial piston variable pump, supplied by RestoPower. Built to meet or exceed the original Bosch Rexroth specification for a precise, dependable fit. The code on your nameplate decodes to an NG 100 frame, 100 cm3/rev (6.10 in3/rev), 47.6 GPM at 1800 rpm, series 31, 4000 psi (280 bar) nominal and 5100 psi (350 bar) maximum, pressure and flow control, X-T open (DFR), clockwise rotation viewed on the drive shaft, NBR (nitrile) seals, shaft seal in FKM, splined shaft, reduced diameter, not for through drive, ISO 3019-1 (SAE J744) 2-hole mounting flange, SAE flange ports at rear, metric fastening thread, rear ported and no through drive.

Specifications

Compatible With

• Bosch Rexroth A10VO100DFR/31R-PUC11N00
• Rexroth A10VSO 100 and A10VO 100 pumps of the same frame size
• NG 100 A10V series axial piston variable pumps, series 31
• Seal kit fitment is set by frame size and design generation. This is the 31 design, and a 31 design kit will not seal the other generation of the same frame
• Control device, rotation, shaft, flange, port position and through drive do not change the seal kit
• Confirm against the full type code stamped on your pump nameplate before ordering

Cross Reference

A10VO100DFR 31R-PUC11N00, A10VO100DFR-31R-PUC11N00, A10VO100DFR/31R-PUC11N00, A10VO100DFR31RPUC11N00, A10VSO100DFR 31R-PUC11N00, A10VSO100DFR-31R-PUC11N00, A10VSO100DFR/31R-PUC11N00, A10VSO100DFR31RPUC11N00, Rexroth A10VO100DFR/31R-PUC11N00, Bosch Rexroth A10VO100DFR/31R-PUC11N00, Brueninghaus Hydromatik A10VO100DFR/31R-PUC11N00, A10VSO100, A10VO100, A10V100

Common Applications

• Industrial hydraulic power units and press machinery
• Injection molding, machine tool and test stand hydraulics
• Construction, agriculture and material handling equipment
• Mobile equipment, drilling rigs and auxiliary drives

Guides & Catalogs

Rebuild Service Available

Have the actual A10VO100DFR/31R-PUC11N00 pump that needs service? RestoPower can fully rebuild your Rexroth A10 axial piston pump to factory specification, rotating group, swashplate, bearings, control and all. See our full repair and rebuild service, or send your unit in for a quote at info@restopower.com or (810) 882-1171.

Frequently Asked Questions

Will this seal kit fit my Rexroth A10VO100DFR/31R-PUC11N00?
Yes. On the A10VO and A10VSO the seal kit is keyed to the frame size, and your code is an NG 100. The control device, series index, rotation, shaft, mounting flange, port position and through drive do not change which kit you need. Send the full code from your nameplate to info@restopower.com and we will confirm fitment the same business day.

Is this genuine OEM or aftermarket?
New OEM Equivalent aftermarket, manufactured to meet or exceed the original Bosch Rexroth specification and backed by our 2-year warranty. We also source genuine new OEM parts when a job calls for it, just ask.

My code says P for seals, why is this kit Viton?
Position 08 of your type code is P, which is how Rexroth built the pump: NBR (nitrile) seals with an FKM shaft seal. The kit we stock for this frame is full FKM (Viton). FKM handles petroleum hydraulic oil and gives you more temperature headroom than NBR. If your machine runs HFA, HFB or HFC water glycol fluid, email us before ordering and we will quote the NBR kit, because FKM is not the right choice for those fluids.

What is in the kit?
A complete seal kit for the NG 100 A10 pump, shaft seal, all housing and cover O-rings, control and port seals and back-up rings. It does not include the rotating group, swashplate, bearings or control valve, those are quoted separately and we stock them.

About RestoPower

RestoPower specializes in hard-to-find and obsolete hydraulic components, Bosch Rexroth, Parker, Denison, Oilgear, Sundstrand, Poclain and more. Email info@restopower.com or call (810) 882-1171 for fitment help.