You can get Muncie Power Products PTO and hydraulic pump parts through RestoPower, an independent hydraulic parts supplier and rebuild shop in Lake Orion, Michigan, but be clear on what that means: Muncie is mostly a sourcing service for us, with two Muncie parts listed today. Send us the model number from the PTO or pump tag and we reply with price, availability and lead time; expect a quote and a lead time rather than an add to cart.
The short answer: two Muncie parts are priced and on the shelf: the 06T38718 output shaft and a genuine Muncie SK8RBKA2 rebuild kit for SH8 PTOs. Everything else Muncie, from PTO units and PTO-driven pumps to valves, seal kits and bearings, is sourced to order. Send us the tag number and we will tell you honestly what is available and what it costs.
What Muncie parts does RestoPower carry?
We hold far less Muncie on the shelf than we do Vickers, Char-Lynn or Denison, and we would rather say so here than have you find out after an order. Here is the whole picture. "On the shelf" means priced and ready to ship. "Sourced to order" means we do not list it, but we go and find it and quote it.
| Muncie product | What we list | How it is supplied |
|---|---|---|
| SH6 and SH8 series PTO parts | Output shaft 06T38718 | On the shelf; other SH6 and SH8 parts sourced to order |
| SH8 series PTO rebuild kits | Genuine Muncie rebuild kit SK8RBKA2, for E, I and Z outputs | On the shelf; other rebuild and gasket kits sourced to order |
| PTO units: CS6 and CS8, CS41, SH6 and SH8, SS66 and SS88 split shaft, and others | Not listed | Sourced to order from the tag |
| PTO-driven hydraulic pumps and their service parts | Not listed | Sourced to order from the pump tag |
| Directional control valves, cable and shift controls | Not listed | Sourced to order |
| Seal kits, shafts, bearings and gaskets for the above | Not listed beyond the shaft and rebuild kit above | Sourced to order |
The two listings live in our Muncie Power Products collection, and the Muncie brand page covers the range we handle.
Which Muncie parts are on the shelf right now?
| Muncie number | What it is | Notes |
|---|---|---|
| 06T38718 | Output shaft | Muncie's SH6 and SH8 parts list shows 06T38718 as the "E" output shaft |
| SK8RBKA2 | Genuine Muncie SH8 PTO rebuild kit | Muncie's SH6 and SH8 parts list shows the SH8-RBK-A2 rebuild kit for E, I and Z output PTOs; send your PTO model so we can confirm it |
That is the whole Muncie shelf today. If it is not in that table, it is a sourced part.
Why is Muncie a quote and not an add to cart?
Because a Muncie PTO is built to the truck. The same PTO family is offered with different input gears, output shafts, mounting arrangements and shift types to suit the transmission and the pump it drives, so the part number that fits one truck can be wrong for the next one with the same badge. A few examples from Muncie's own literature:
- The output shaft is a letter code. In the SH6 and SH8 parts list the output shaft is picked by a letter (B, C, E, G, I, K, P and more), and each letter is a different part number. 06T38718 is the E shaft. The letter on your PTO matters more than the series name.
- The CS6 and CS8 are offered with 23 transmission input gears. That is why we ask for the full model number off the tag rather than "a CS6".
- Pump service parts are split by pump series. Muncie lists pump service parts by series, E, F, H, K, L and S, so the pump tag, not just the PTO tag, decides the seal kit or shaft for the pump end.
None of that makes Muncie hard to source. Finding discontinued and hard-to-find components is the core of what we do. It just means the honest answer is a quote with a lead time, and we would rather give you that than a price for the wrong part.
Can I get a genuine Muncie part, or only aftermarket?
We source both. RestoPower is an independent supplier, not a Muncie Power Products distributor. When you ask for a part, we tell you whether what we found is genuine Muncie or an aftermarket equivalent, what it costs and how long it takes, and you decide. The SK8RBKA2 rebuild kit on our shelf is genuine Muncie, and every listing we carry shows its Muncie number.
Do you have parts for a Parker Commercial dump pump?
If the pump on your PTO is a Parker Commercial C101, C102, G101 or G102 dump pump, yes, and those are on the shelf: four seal kits and two air shift kits. The C and G frames do not share seals or shift kits, so read the casting first. See the Commercial dump pump kits or where to buy Parker parts.
What do I need to send to get the right Muncie part?
- The model number from the PTO tag, and from the pump tag if a pump is mounted on it. A photo of each tag is best.
- The truck and transmission make and model, since the PTO is matched to the transmission.
- What you need: a single part, a seal kit, a shaft, or a complete PTO or pump.
- If the tag is gone, photos of the PTO from both sides, the output shaft and the pump mount.
If the trouble is a dump pump that will not build pressure or a PTO-driven pump that has lost flow, send the symptom along with the numbers. The guide to identifying a pump with no tag and the case drain flow test can help you narrow it down first.
Can you rebuild my Muncie pump instead?
Yes. We repair and rebuild the pumps and valves used in truck hydraulic systems as well as sourcing parts for them. Repairs happen in our shop in Lake Orion, Michigan, or through the RestoPower repair network, and we arrange getting the unit to the shop doing the work. The teardown evaluation is free, you get a firm, itemized quote before any billable work, and work done in our shop carries a 1-year repair warranty. For a network job, the price, turnaround and warranty are confirmed on your quote before work starts. See hydraulic pump, motor and valve repair for what the job covers.
Frequently asked questions
Where can I buy Muncie PTO and hydraulic pump parts?
RestoPower, an independent supplier and rebuild shop in Lake Orion, Michigan, sources Muncie Power Products PTO and pump parts to order. We list two Muncie parts today, so most Muncie requests are quoted: send the model number from the PTO or pump tag and we reply with price, availability and lead time.
Which Muncie parts are in stock?
Two Muncie parts are priced and ship within 24-72 hours: the 06T38718 output shaft, which Muncie's SH6 and SH8 parts list shows as the E output shaft, and the genuine Muncie SK8RBKA2 rebuild kit for SH8 PTOs with an E, I or Z output. Everything else Muncie is sourced to order.
Why do I have to request a quote for Muncie parts?
Because we hold very little Muncie on the shelf, and because Muncie PTOs are built to the truck, with different input gears, output shafts and mountings in the same family. We match the part to your tag number and quote price, availability and lead time rather than guess.
Do you sell genuine Muncie parts?
Yes. The SK8RBKA2 SH8 rebuild kit we stock is genuine Muncie. For anything else we source both genuine Muncie and aftermarket equivalents and always tell you which one we found. RestoPower is independent, not a Muncie Power Products distributor.
What information do you need to quote a Muncie part?
The model number from the PTO tag, the pump tag if a pump is mounted, the truck and transmission make and model, and what part you need. Photos of the tags help. If the tags are gone, send photos of the PTO, the output shaft and the pump mount.
Can you repair a PTO-driven pump instead of selling me parts?
Yes. Repairs happen in our shop or through the RestoPower repair network, and we arrange getting the unit to the shop doing the work. The teardown evaluation is free, you get a firm, itemized quote before any billable work, and work done in our shop carries a 1-year repair warranty.
Send us a Muncie tag number
Send the model number from the PTO or pump tag, or a photo of it, plus the truck and transmission. We reply with price, availability and lead time. In-stock parts ship within 24-72 hours and in-stock parts carry a 2-year warranty. If the unit needs a rebuild, the teardown evaluation is free, you get a firm, itemized quote before any billable work, and work done in our shop carries a 1-year repair warranty.
Request a quote · (810) 882-1171 · Repair and rebuild service
Related reading
- Muncie brand page
- Muncie parts listed
- Commercial dump pump kits
- Parker and Commercial gear pumps
- Identify a pump with no tag
- Case drain flow test
- Resources hub
- Shop by brand
- Where to buy Vickers parts
- Where to buy Char-Lynn parts
- Where to buy Poclain parts
- Where to buy Rexroth parts
- Where to buy Denison parts
- Where to buy Sundstrand parts
- Where to buy Parker parts
- Where to buy Oilgear parts
- Where to buy Kawasaki parts
- Where to buy Racine parts